lx lh torana accelerator pedal mounting diagram

hey tnuts,

need a fav

went to do a little more work on the hatch today and i have miss placed my workshop manual,

can some one out there post up the diagram for the automatic pedal mounting assembly 

spent more time looking for the manual; than it would take to put together ... shts me

lx hatch

cheers guys

bugger on the work comp...cant get on the shared sites to see this but thanks anyway i will look when i get home tomorrow morn..

cheers brad

I thought I could screenshot the picture and put it up, but my internet is running that slow tonight it would be faster to chisel it into a stone tablet and have 100 carrier pigeons drag it to you. 

Is LH and LX the same? I can get my LH one out of the shed in the morning.

i would appreciate any that could help with this and i am under the impression they are the same, 

cheers lads

From the LH Workshop Manual.

perfect exactly what i need thanks to all that replied 

I don't want to give away too much here, but there are a couple of different Pedal Lever and Pivot assemblies. It shouldn't affect you Jonesy unless you have another car in the shed you aren't telling us about.

Same as the different clutch pedal points between 6 & 8cyl for my WB.  Cheers Ron

I don't want to give away too much here, but there are a couple of different Pedal Lever and Pivot assemblies. It shouldn't affect you Jonesy unless you have another car in the shed you aren't telling us about.

hahha cant really afford any more regos with the current projects and cars

 IMG_0941.jpg   124.15K   3 downloads

Heres the pedal from my hatch. It was a factory 6. Looks the same as yours Hanra.

Here are the 2 pedals I have.  The one on the left is, I believe from a H series car.  The one on the right I think/hope is a Torana one.  I note that it is slightly different to yours Scott (or maybe it's just the camera angle).  According to the parts catalogue, if I'm reading it right there is a different part # for the 8cyl pedal than the 4 & 6's but I haven't been able to find anything about this.  I also noted that the kickdown bracket for the H series is different from the Torana one (which I am trying to source at present).  Cheers Ron

I didn't think to look at my WB parts catalogue until you mentioned it yel327.  It shows different part numbers for 6 (#9933550) & 8cyl (#9933549).  I wonder what they look like.  FWIW the part # for the LX are 4 & 6cyl (#9933378) & 8cyl (#9933483). Cheers Ron

Toranamat69 that's awesome.  Do you have any idea of the different lengths from the top to the pivot point?  Cheers Ron

Thanks Toranamat.  If I had of thought (hard for me sometimes lol) I guess it's the same measurement as between the different bolt holes in the firewall bracket.  Thanks again. Ron