Same same Hanra, plus they don't fit the holes in the nose cone. Les has dispatched a new batch for us to try.
Maybe LX's are 1.0m thick, but I measured the steel thickness on the LH nose cone (stripped) and it indeed measures 1.6mm. I knew LH's were better.
Plastic plugs for nose-cone badge
Started by
_napes_au_
, Dec 13 2011 07:03 AM
112 replies to this topic
#52
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 30 January 2012 - 10:17 PM
Got a whole heap of clips from Les today. Tried all of em... none of em any good.... There was only one lot that fitted the hole in the nose cone.... but the badge shaft hole was way to small. The rest of them were way to big to fit into the nose cone....
#53
_CHEVED_
_CHEVED_
-
- Guests
Posted 08 July 2012 - 10:17 PM
Hi did anyone sorce these in the end I'm after a set for my nose cone cheers.
#54
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 08 July 2012 - 10:39 PM
Nothing at my end.... I tried all the possible plugs from RSP but nothing fit..
#55
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 09 October 2012 - 01:04 PM
Just thought Id bump this up as Im actually getting to the point of needing to fit my T O R A N A badge... Anyone get any other ideas?
#56
turbo76lx
-
- Members
-
- 645 posts
Forum Fixture
- Name:Glen
- Location:Vic
- Car:LX
- Joined: 15-August 08
Posted 09 October 2012 - 06:10 PM
One of my mates at work used the plastic sticks from chupa chups lollipops.
#57
LHSL
-
- Members
-
- 995 posts
Forum Fixture
- Name:Phillip
- Location:SYDNEY
- Car:1974 LH SL; 2 x 1975 LH S Toranas
- Joined: 30-March 07
#58
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 10 October 2012 - 03:12 PM
Hey mate. Not sure the OD would be suitable. The holes in the body work dont seem that big. I guess they could be drilled out larger....(risky).
#59
SWOOP74
-
- Members
-
- 55 posts
Forum Member
- Joined: 09-November 05
Posted 10 October 2012 - 08:18 PM
no they are not the ones either i have been looking for few years, the only thing i could get my hands
on was some used ones as soon as i get a chance i will post a picture.
on was some used ones as soon as i get a chance i will post a picture.
#60
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 17 October 2012 - 09:35 PM
How did you go with the pics mate?
#61
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 29 October 2012 - 03:10 PM
Hi Les.
Ive noticed RSP are now selling the T O R A N A badges as a repro?
Are you also supplying retaining sockets/clips with these badges????
http://www.rarespare...x?product=B1091
Ive noticed RSP are now selling the T O R A N A badges as a repro?
Are you also supplying retaining sockets/clips with these badges????
http://www.rarespare...x?product=B1091
#62
_Old John 65_
_Old John 65_
-
- Guests
Posted 29 October 2012 - 04:32 PM
Hi Brad
No we are not, we have not been able to get any good samples to be able reproduce them.
if anyone has any good samples that we could use to make these we would replace them with new ones once we make them.
Les
No we are not, we have not been able to get any good samples to be able reproduce them.
if anyone has any good samples that we could use to make these we would replace them with new ones once we make them.
Les
#63
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 29 October 2012 - 05:10 PM
Hi Les.
Hmmm. Seems to be some confusion here. I saw these on eBay and contacted the seller which is Brisbane rare spares. Here is there reply:,
Hi,
Yes, the letters do come with the retaining clips.
Kind regards,
Andrew
Rare Spares Brisbane
- raresparesbrisbaneqld
Hmmm. Seems to be some confusion here. I saw these on eBay and contacted the seller which is Brisbane rare spares. Here is there reply:,
Hi,
Yes, the letters do come with the retaining clips.
Kind regards,
Andrew
Rare Spares Brisbane
- raresparesbrisbaneqld
#64
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 30 October 2012 - 07:54 AM
I asked for a pic of the plugs supplied with the badge. This is the response.
Hi
I dont actually have a picture of the retaining clips. They are a very small cup shaped metal clip that will go into the body and the badge will push into it.
Kind regards,
Andrew
Rare Spares Brisbane
Hi
I dont actually have a picture of the retaining clips. They are a very small cup shaped metal clip that will go into the body and the badge will push into it.
Kind regards,
Andrew
Rare Spares Brisbane
Edited by hanra, 30 October 2012 - 07:55 AM.
#65
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 30 October 2012 - 07:58 AM
But yes, please if someone has some spare, could they please supply RSP with them so they can be copied!!!!!
#66
_les_
_les_
-
- Guests
Posted 30 October 2012 - 06:36 PM
we will be using these http://www.rarespare...?product=NS0039 part number NS0039
#67
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 30 October 2012 - 07:14 PM
Hmmmm ok. I wonder if they will fit through the existing holes in the body work?
#68
_LH SLR 3300_
_LH SLR 3300_
-
- Guests
Posted 01 November 2012 - 05:30 PM
I assume these are the plastic plugs you refer to.
The ones pictured are a mix of mainly NOS ones & a few mint second hand ones. How many would be needed for the purpose of reproducing them. I would like to help if i can but i am reluctant to part with them as i spent years searching high & low for them to use on my SL/R project & i would only be willing to do so if they were returned or replaced with exact the same quality/quantity. Cheers Matt
The ones pictured are a mix of mainly NOS ones & a few mint second hand ones. How many would be needed for the purpose of reproducing them. I would like to help if i can but i am reluctant to part with them as i spent years searching high & low for them to use on my SL/R project & i would only be willing to do so if they were returned or replaced with exact the same quality/quantity. Cheers Matt
#69
hanra
-
- Members
-
- 10,831 posts
Oh My, Don't you post alot
- Name:Brad
- Location:Farrrrrr North Qld
- Car:1975 LH SL/R 5000, 1967 Morris Cooper S, E36 BMW, Toyota Corolla, Isuzu DMax
- Joined: 24-March 11
Posted 01 November 2012 - 07:16 PM
Thank you for putting your hand up Matt!!!! Hopefully Les and the Team at Rare Spares can help out here!!!!
And I think your requests are more then satisfactory!!!!
And I think your requests are more then satisfactory!!!!
Edited by hanra, 01 November 2012 - 07:17 PM.
#70
a9x868
-
- Members
-
- 1,417 posts
maurice mead of hatchbacks
- Name:facebook dave
- Location:perth miles n miles from shiney
- Car:valencia holden torana a9x hatch ultimate improvement on the barbados L34
- Joined: 24-July 11
Posted 01 November 2012 - 09:30 PM
now thats a rare bit if ever i've seen oneI assume these are the plastic plugs you refer to.
The ones pictured are a mix of mainly NOS ones & a few mint second hand ones. How many would be needed for the purpose of reproducing them. I would like to help if i can but i am reluctant to part with them as i spent years searching high & low for them to use on my SL/R project & i would only be willing to do so if they were returned or replaced with exact the same quality/quantity. Cheers Matt
#71
_sstorana_
_sstorana_
-
- Guests
Posted 07 December 2012 - 06:17 AM
Hi Guys
While I have been doing a little research into Badge pin locations, I have found that the above letter badges that I have do not have the plastic plugs. They have a metal clip similar to the larger badge clips.
Looking through the parts catalogues, they list the following;
LH
1.265 LETTER, CLIP, NAME PLATE, TRANSFER - Front end panel
Clip, Letter: SP2419 Qty 12
12.182 Letter, Plate, Clip,Rear Deck Lid
Clip Letter Attaching: SP2419 Qty 12
LX
1.265 LETTER, CLIP, NAME PLATE, TRANSFER - Front end panel
Clip, Letter: SP2419 Qty 12
12.182 Letter, Plate, Clip,Rear Deck Lid
Clip Letter Attaching: SP2419 Qty 12
Hope this helps...
cheers
Mick
While I have been doing a little research into Badge pin locations, I have found that the above letter badges that I have do not have the plastic plugs. They have a metal clip similar to the larger badge clips.
Looking through the parts catalogues, they list the following;
LH
1.265 LETTER, CLIP, NAME PLATE, TRANSFER - Front end panel
Clip, Letter: SP2419 Qty 12
12.182 Letter, Plate, Clip,Rear Deck Lid
Clip Letter Attaching: SP2419 Qty 12
LX
1.265 LETTER, CLIP, NAME PLATE, TRANSFER - Front end panel
Clip, Letter: SP2419 Qty 12
12.182 Letter, Plate, Clip,Rear Deck Lid
Clip Letter Attaching: SP2419 Qty 12
Hope this helps...
cheers
Mick
#72
Stedz_lc
-
- Members
-
- 1,144 posts
Forum Fixture
- Joined: 10-November 05
Posted 14 March 2013 - 08:15 PM
Anything guys??
#73
V-SLR5000-P
View Garage
-
- Members
-
- 1,300 posts
Forum Fixture
- Location:Victoria
- Car:L34 x 2
- Joined: 14-November 06
View Garage
Posted 14 March 2013 - 09:13 PM
My original LH nose cone had the same plastic plugs as shown in the photos posted by LH SLR 3300.
The plugs are inserted into the holes in the nose cone from the front and then the letters were installed. They dont go onto the back of the pins once the letters are fitted into the nose cone as you might suspect. I tried to remove them without damage, but they are hard and brittle, l now have about half a set.
#74
_sting_
_sting_
-
- Guests
Posted 15 March 2013 - 10:00 AM
Hi guys I found this guy that has a lot off old stuff he is called Mr Screws his phone number is 0425248848 he has every thing for automotive fasteners & screws by the way his real name is Dino hope this helps.
cheers sting
#75
308mate
View Garage
-
- Members
-
- 523 posts
Forum Fixture
- Name:scott
- Location:Wootton - between Newcastle & Taree, NSW
- Car:76 SS hatch (Royal Plum, Chevron Chamois interior), HQish Van (Orchid Metallic)
- Joined: 19-May 09
View Garage
Posted 13 October 2013 - 07:18 AM
Sorry to resurrect this one but I'm looking for some of these plastic plug inserts. My early hatch has the individual T.O.R.A.N.A letters on the passenger side hatch lid. The letters are retained by the push in plastic type plugs.
Did anything come from the search?
Cheers Scott
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
