[A9XOSS]

G'day, does anyone know where i can get fabricated alloy V8 EFI (vn-vt) type
rocker cover's from, as i'm having trouble getting them. the only type i can
find are the cast polished type from the KC brand. cheers.

[sshatch355]

http://bocam.com.au/valvecovers.php

[A9XOSS]

thanx sshatch355, exactly what i'm after and there product looks great.

[dattoman]

I've used Bocam before
No problems here

[sshatch355]

the kc's look sweet though but i may be biased

[2wild4u]

i use the IPR ones, very nice aswell, i think their site is http://www.iprraceproducts.com/

[dattoman]

[sshatch355]

^^^^^^ sweet!

[A9XOSS]

2wild4u, IPR ones look good too, sshatch355, as for the KC ones they do look great when fitted.
i didn't think they look that good until now. your colour combo is similar to
what mine is going to be orange with black/silver engine, thanx again people it helped alot.

[lx308]

I've got a set of the KC ones sitting in my shed. They won't fit over the roller rockers with the engine in the car. I also still have the fan housing on the firewall & Torana engine mounts.

[A9XOSS]

lx308, on 30 July 2010 - 07:36 PM, said:

I've got a set of the KC ones sitting in my shed. They won't fit over the roller rockers with the engine in the car. I also still have the fan housing on the firewall & Torana engine mounts.

lx308, are they for sale and are they to suit efi v8 also polished/black/raw.

This post has been edited by A9XOSS: 30 July 2010 - 07:47 PM

[sshatch355]

mine clear but i use vn booster/master cyl,velocity hq mounts so it sits lower and back abit but if you wanted to keep the heater fan it would need the mods done on it

[A9XOSS]

g,day, i have rang BOCAM and they sent me some pics of these covers.
would this breather system be street legal on a 77 LX in NSW.
 vnkn 0011.JPG (185.72K)
Number of downloads: 18  vnkn 0021.JPG (193.25K)
Number of downloads: 17

[MRLXSS]

sshatch355, on 30 July 2010 - 01:14 AM, said:

the kc's look sweet though but i may be biased

NICE! I have seen these on ebay, and always wanted to see what they looked like on a motor! I like!

[sshatch355]

i had breathers like that with baffels on my vn ss and it used to blow oil at hi rpm and make a mess

[A9XOSS]

dattoman,cheers for the tip on these covers.

sshatch355, thanx again mate. guess i will go for the catch can type set, just cost alot more to rig up dam.

This post has been edited by A9XOSS: 17 August 2010 - 08:51 PM

[A9XOSS]

I received my new rocker cover's yesterday,and fitted them asap. i think they look great,
the rear of left one has been made to miss the heater box aswell staight off the shelf.
 PIC_0871.JPG (188.73K)
Number of downloads: 19  PIC_0854.JPG (152.97K)
Number of downloads: 24  PIC_0864.JPG (157.28K)
Number of downloads: 17
thanx again for the advise too fella's. Col.

[TerrA LX]

A9XOSS, on 16 August 2010 - 10:12 PM, said:

g,day, i have rang BOCAM and they sent me some pics of these covers.
would this breather system be street legal on a 77 LX in NSW.
vnkn 0011.JPG vnkn 0021.JPG

NO, they delete PCV.

Hey sorry for the late reply, I only just seen this thread.