LH-LX-UC Centre Vents
#26
Posted 29 January 2008 - 10:41 AM
#27
Posted 29 January 2008 - 10:54 AM
I'll second that!I'm an idiot.
#28 _Yella SLuR_
Posted 29 January 2008 - 05:33 PM
That makes sense, turn it 180deg for opposite direction. How simple?
#29 _Leakey_
Posted 30 January 2008 - 09:30 AM
be closed off, required a manual flap to close off air.
LX had the one way type, which could be closed off, and hence no flap is required.
they save a bit production wise, and lose a lever and flap.
Both LH & LX air con set ups used vac. actuated flaps integrated in the system.
But the UC pic? The cowl is different I know, but didn't the UC have LX style
one way vents? Perhaps they were using up old stocks of vents? The UC pic
shows the manual flap. (or is that an optical illusion??)
Can a UC owner show us some centre vent pics please - non airconditioned.
- Leakey
Edited by Leakey, 30 January 2008 - 09:37 AM.
#30 _Leakey_
Posted 30 January 2008 - 11:09 AM
- Leakey
#31 _Yella SLuR_
Posted 30 January 2008 - 07:59 PM
#32
Posted 30 January 2008 - 09:02 PM
Cheers.
#33 _Yella SLuR_
Posted 31 January 2008 - 05:02 PM
#34 _Chriskoss-79uc_
Posted 31 January 2008 - 06:52 PM
Same with me.My UC has the "spinner" type, no aricon
My vents spin around to close and open. They're held in by two screws at the top. If you undo them, they come out and then you can pull it out to reveal the heater box.
And I have a 79 UC SL Hatch
#35
Posted 31 January 2008 - 11:47 PM
So long as you dont have a console.Takes about 5 seconds to change it.
If you do, you need to undo it and move it back to make room for it to pass as you slide it sideways.
#36 _Yella SLuR_
Posted 01 February 2008 - 09:32 PM
#37
Posted 07 April 2021 - 10:16 PM
#38
Posted 08 April 2021 - 01:52 AM
Thread High jack but for some reason I can't post in wanted section...looking for a set of these vents to go on my LX hatch heater box....does anyone have a set and post to WA for me...please pm me..
Adjustable or non adjustable?
#39
Posted 08 April 2021 - 09:04 PM
#40
Posted 09 April 2021 - 06:11 PM
Kirk ...I'll take anything at the moment, what have you got?
i think i have a couple of non adjustable ones
#41
Posted 13 April 2021 - 12:11 PM
thanks anyway kirk for responding to my 'wanted' even tho on the wrong thread section...
kirk has only the vents themselves .... i need the slide section as well .... does anyone out there have one for sale.. please pm me
current state 20210412_181536.jpg 131.9K 4 downloads
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users