Hey again all.
Has anyone got a VN wiring diagram for the dash and what runs to it, and from where?
I've decided that since I'm putting a v6 in the UC, I might as well put a vn dash in, too, as they are quite similar in size.
So there you are. PLEASE help me!!!
Cheers
Crisis
VN Dash Wiring Diagram
Started by
_Crisis_
, Mar 14 2006 07:06 PM
6 replies to this topic
#2
_jdss57_
_jdss57_
-
- Guests
Posted 14 March 2006 - 08:41 PM
hi mate, i have just done this conversion in a lh. you are better off throwing all your torana wiring and fitting a whole harness (headlights to taillights) from a commodore.
#4
_Hotrodder_
_Hotrodder_
-
- Guests
Posted 16 March 2006 - 12:58 AM
Or get a wiring loom from Castle Auto Electrics which will plug into your existing torana harness, and connect up to the V6.
http://www.castleauto.com.au/
or go directly to the page you require
http://www.castleaut...dbase/efilh.php
http://www.castleauto.com.au/
or go directly to the page you require
http://www.castleaut...dbase/efilh.php
Edited by Hotrodder, 16 March 2006 - 01:00 AM.
#5
_Crisis_
_Crisis_
-
- Guests
Posted 16 March 2006 - 11:39 AM
Hey.
Thanks jdss57. Those pics look great.
I'm actually going to fit the "Dash" (Speedo, tacho etc.) from a vn INTO where the uc's original gauges were. I like the UC dash and console shape, so I decided to keep it. its all in good nick anyways.
However, I did just pick up a pair of VN berlina front seats that will be going in this weekend. I'll post some pics when I get a camera!!!
Cheers.
Crisis
Thanks jdss57. Those pics look great.
I'm actually going to fit the "Dash" (Speedo, tacho etc.) from a vn INTO where the uc's original gauges were. I like the UC dash and console shape, so I decided to keep it. its all in good nick anyways.
However, I did just pick up a pair of VN berlina front seats that will be going in this weekend. I'll post some pics when I get a camera!!!
Cheers.
Crisis
#6
enderwigginau
-
- Moderators
-
- 2,000,527 posts
Admin Wrangler
- Name:Grant
- Location:Brisneyland
- Car:76 LX Sedan, 4 seater
- Joined: 04-February 07
Posted 16 March 2006 - 02:25 PM
Make sure the instrument cluster you have matches the ECU you have. EG. VN Series One or VN Series Two.
You cannot hook a Series One ECU to a Series Two Cluster......and vice versa.
Grant..
You cannot hook a Series One ECU to a Series Two Cluster......and vice versa.
Grant..
#7
_Crisis_
_Crisis_
-
- Guests
Posted 17 March 2006 - 12:07 PM
Hey again.
Thanks, Grant. I didn't know that. I'll be sure to look out for it.
Crisis.
Thanks, Grant. I didn't know that. I'll be sure to look out for it.
Crisis.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
