We are located 10 Long St Smithfield NSW. We are a family business & have been operating since 1978.
We do ratio changes, limited slip upgrades, rebuilding & repairs to most popular makes & models.
Contact us on 9609 1514 or call in for a free strip & quote or visit www.gearexhange.com.au
Gear Exchange Services
Started by
_gearex_
, Sep 01 2009 09:41 PM
21 replies to this topic
#2
_gearex_
_gearex_
-
- Guests
Posted 02 September 2009 - 06:54 AM
sorry it was a long day, web site is www.gearexchange.com.au
#3
_The Baron_
_The Baron_
-
- Guests
Posted 02 September 2009 - 10:20 PM
G'day.
I visited your WEB site and I see it referenced mainly modern gear.
What can you offer for the good old torry? (I hope I appear constructive which is my intent)
I visited your WEB site and I see it referenced mainly modern gear.
What can you offer for the good old torry? (I hope I appear constructive which is my intent)
#4
_gearex_
_gearex_
-
- Guests
Posted 03 September 2009 - 07:13 AM
G'day Baron, constuctive comments welcome! I still have to up-date the page, but for the toranas we do ratio changes from 2.78, 3.08, 3.36 3.55. 3.90, fine spline , course spline V8 & 6cyl. We have just got alot of new Banjo Limited slip gears & cones aswell as hemisphere pins & small planetarty gears. For the bigger 10 bolt diffs (ie) A9X we normally carry the whole range from 2.60, 2.78, 3.08, 3.36, 3.55, 4.44 in stock. Jay
#5
_rogered_
_rogered_
-
- Guests
Posted 03 September 2009 - 07:34 AM
G'day Baron, constuctive comments welcome! I still have to up-date the page, but for the toranas we do ratio changes from 2.78, 3.08, 3.36 3.55. 3.90, fine spline , course spline V8 & 6cyl. We have just got alot of new Banjo Limited slip gears & cones aswell as hemisphere pins & small planetarty gears. For the bigger 10 bolt diffs (ie) A9X we normally carry the whole range from 2.60, 2.78, 3.08, 3.36, 3.55, 4.44 in stock. Jay
hi
i have a banjo lsd on in bits at the moment.
i will need new lsd cones, and purchsed a while ago some 30 over ones,
Can i get std of smaller oversize as 30 is to big.
cheers
#6
_gearex_
_gearex_
-
- Guests
Posted 03 September 2009 - 08:58 PM
Hi, new cones we use can be made slightly bigger to compensate the wear in your hemisphere housing. It sounds like the ones you have now, you wil have to machine a fair bit of the hemisphere for them to fit. Jay
#7
tsn007
-
- Members
-
- 1,010 posts
Forum Fixture
- Name:Tony
- Location:LIVERPOOL, NSW
- Car:LX hatch, LX sedan
- Joined: 25-April 07
Posted 22 August 2010 - 08:28 PM
highly recommended , Excellent workmanship and service
thanks Jason
thanks Jason
#8
_@milco@_
_@milco@_
-
- Guests
Posted 23 August 2010 - 10:57 PM
how much for a lsd center for a BW78 3.45ish ratio 28 spline 4 pinion?
#9
TerrA LX
-
- Members
-
- 14,241 posts
Fulcrum Fixture
- Location:Sid 'n' knee
- Joined: 31-May 06
Posted 23 August 2010 - 11:31 PM
Do you do gearbox service as well?
#10
_gearex_
_gearex_
-
- Guests
Posted 25 August 2010 - 03:15 PM
Do you do gearbox service as well?
No not automatics, sorry mate. Just manuals & diffs.
Thanks for the feed back Tony, & @milco@ Pm sent. Jay
#11
TerrA LX
-
- Members
-
- 14,241 posts
Fulcrum Fixture
- Location:Sid 'n' knee
- Joined: 31-May 06
Posted 25 August 2010 - 03:18 PM
Oh I meant manual, maybe Jason did not know you did them, I too require a strip and re assemble of a Gbox.
How versed are you on the popular toyota 5 speeds?
How versed are you on the popular toyota 5 speeds?
#12
GTR469
-
- Members
-
- 496 posts
Forum Fan
- Location:NSW
- Joined: 24-January 08
Posted 25 August 2010 - 06:32 PM
Haha i just pulled out one of your business cards, and it does say gearboxes.
I will give you a call tomorrow Jay.
Jason
I will give you a call tomorrow Jay.
Jason
#13
_on the limit_
_on the limit_
-
- Guests
Posted 11 December 2010 - 09:39 AM
I just used the gear exchange diff shop in smithfield again, once again quick reliable, excellent service, was going to put a limited slip into my 9 inch, but jay told me to go for the true track, man what a fun car it now is to drive, Thanks wayne(2LCS) for the reccomendation & Thanks jay!!
#14
xu1kid
-
- Members
-
- 364 posts
Forum Fan
- Name:anthony
- Location:Albury
- Car:lj gtr xu1
- Joined: 30-December 08
Posted 11 December 2010 - 05:44 PM
hi mate can you give me a quote on a new hydratrak centre for a vs senator 215 and bearings, also how much for a set of 3.9 gears for the same car i mentioned,
cheers
cheers
#15
_gearex_
_gearex_
-
- Guests
Posted 12 December 2010 - 03:05 PM
No worries, i'll send you a PM on monday morning.
#16
_JChantrey_
_JChantrey_
-
- Guests
Posted 16 June 2013 - 06:24 PM
Don't suppose you guys are still active on this forum?
#17
mitchg
-
- Members
-
- 3,111 posts
The guy with the Torailer
- Name:Mitch
- Location:Ingleburn, NSW
- Car:Was a '77 LX V6 Torana + Torailer now VX SS
- Joined: 19-May 07
Posted 16 June 2013 - 08:16 PM
Jasons around now and then. If you want i can remind him to have a look?
#18
_JChantrey_
_JChantrey_
-
- Guests
Posted 16 June 2013 - 11:41 PM
Might just be easier if i give them a ring tomorrow?
#19
Tiny
-
- Administrators
-
- 10,018 posts
Oh My, Don't you post alot
- Name:Tiny
- Location:Sydney
- Joined: 04-February 07
Posted 25 June 2013 - 07:30 PM
I can definitely vouch for Jason's Service!
Via mark at Eze10s performance, Jay built the Diff in the HQ with all the top bits!
Excellent service! Thanks Jay!
#20
wot179
-
- Members
-
- 6,784 posts
Green Eggs and Spam
- Name:Jesus Bloody Christ
- Location:Sunny Santa Maria
- Car:Goon
- Joined: 06-February 09
Posted 31 May 2016 - 05:16 PM
Got Gear Exchange to stick a new diff in The Goon today (on Fossils advice).
Rang him yesterday, turned up at 8am today and it was done by 11.
Nice and quiet now, and great service.
Nice bloke too.
Thanks mate.
#21
r2160
-
- Members
-
- 712 posts
Forum Fixture
- Name:Glenn
- Location:sydney
- Car:2/71 LC GTR, 4/71 LC 4 'S'
- Joined: 20-May 09
Posted 31 May 2016 - 09:51 PM
Just make sure he actually does the work . . .
#22
_Agent 34_
_Agent 34_
-
- Guests
Posted 09 June 2016 - 07:02 PM
Jay - has done some work on a few of my diffs and replaced parts and crown wheels and pinions - top service - does the work there.
Edited by Agent 34, 09 June 2016 - 07:02 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
