593 replies to this topic

[YELLAcakeu308]

Attached Files

•  20190508213942.jpg   87.74K   7 downloads
•  20190508214327.jpg   87.62K   5 downloads

[YELLAcakeu308]

Attached Files

•  20190508214252.jpg   57.22K   5 downloads
•  20190508222418.jpg   104.85K   4 downloads

[YELLAcakeu308]

Godzila? Monzila lol

Attached Files

•  20190509083026.jpg   62.99K   3 downloads

[YELLAcakeu308]

Salad tossers

Attached Files

•  20190510141422.jpg   65.63K   3 downloads

[YELLAcakeu308]

Bbs rs

Attached Files

•  20190510135851.jpg   64.49K   3 downloads

[YELLAcakeu308]

Euro salad tosser

Attached Files

•  20190510141255.jpg   65.2K   2 downloads

[YELLAcakeu308]

Always liked the hsv tri spoke

Attached Files

•  20190510142908.jpg   65.91K   3 downloads

[YELLAcakeu308]

A company remade the tri spoke in a 20"
An 18" or 19" would suit this build

Attached Files

•  20190510143041.jpg   65.61K   3 downloads

[YELLAcakeu308]

this is where im up to with the gearbox crossmember.
We chopped the outters off the VS crossmember to uterlise the mount setup.
its not welded to the cradle that a mate fabbed up, as im thinking it mite be best to wait until the tailshaft gets modifed.

Thanks. I'll watch with interest......

Attached Files

•  Screenshot_2019-05-12-12-47-22.png   1.94MB   3 downloads

[YELLAcakeu308]

Went a different way with gearbox xmember.
Bought a dellow one
Pre drilled were pretty close.
I just slotted them out a little with the die grinder

Attached Files

•  Screenshot_2019-05-12-12-48-25.png   987.01K   3 downloads

[YELLAcakeu308]

Test fit to 5L vs T5 Gearbox mount.
Guessing holden had issues with the earlies small mount setups?

Attached Files

•  Screenshot_2019-05-12-12-47-57.png   976.86K   7 downloads

[YELLAcakeu308]

Locked into position & a mates guna weld it (thanks steve

Attached Files

•  20190512_122015.jpg   153.5K   6 downloads

[YELLAcakeu308]

Oops

Attached Files

•  Screenshot_2019-05-12-13-10-59.png   1018.82K   2 downloads

[YELLAcakeu308]

Should do for now.
Car needs to go somewhere with a hoistto measure/ align the mount properly.
Dare say the gearbox needs to move closer to the passenger side & maybe lower by an inch or so...

Attached Files

•  Screenshot_2019-05-12-17-24-53.png   931.83K   2 downloads

[YELLAcakeu308]

Inspiration

Attached Files

•  Screenshot_2019-05-12-17-30-43.png   375.34K   2 downloads
•  images-130.jpeg   31.75K   2 downloads
•  Screenshot_2019-05-12-17-31-19.png   410.12K   2 downloads
•  Screenshot_2019-05-12-17-31-28.png   423.22K   3 downloads

[YELLAcakeu308]

Attached Files

•  Screenshot_2019-05-12-21-32-01.png   455.23K   4 downloads

[YELLAcakeu308]

Yep.
(With Calais head lights)

Attached Files

•  Screenshot_2019-05-12-21-32-10.png   593.43K   3 downloads

[YELLAcakeu308]

Attached Files

•  Screenshot_2019-05-18-23-02-42.png   325.98K   1 downloads

[YELLAcakeu308]

Attached Files

•  Screenshot_2019-05-18-23-01-34.png   310.58K   1 downloads
•  Screenshot_2019-05-18-23-02-03.png   882.34K   1 downloads
•  Screenshot_2019-05-18-23-02-08.png   377.77K   1 downloads

[YELLAcakeu308]

Metal

Attached Files

•  Screenshot_2019-05-18-23-02-21.png   273.09K   2 downloads
•  Screenshot_2019-05-18-23-43-56.png   999.9K   2 downloads
•  Screenshot_2019-05-18-23-44-07.png   326.57K   2 downloads

[YELLAcakeu308]

Was leaning towards the hdt vl (centre) gauge setup with the alloy plate...

Attached Files

•  Screenshot_2019-05-19-04-27-37.png   1.15MB   3 downloads

[YELLAcakeu308]

But not keen on chopping up the dash just yet.
Saw online that you can get a cassette tape with a Bluetooth chip or SD card input.

Attached Files

•  Screenshot_2019-05-19-04-29-05.png   957.25K   5 downloads

[YELLAcakeu308]

Retro tech

Attached Files

•  Screenshot_2019-05-19-06-51-22.png   415.53K   2 downloads
•  Screenshot_2019-05-19-06-51-36.png   339.47K   2 downloads

[YELLAcakeu308]

Dreamworld

Attached Files

•  Screenshot_2019-05-27-09-38-42.png   918.88K   1 downloads
•  Screenshot_2019-05-27-09-39-34.png   904.28K   1 downloads

[YELLAcakeu308]

Attached Files

•  Screenshot_2019-05-27-09-40-24.png   972.71K   1 downloads
•  Screenshot_2019-05-27-09-40-36.png   1.19MB   3 downloads
•  Screenshot_2019-05-27-09-40-47.png   1.04MB   1 downloads