rear drum brake info......
#1 _Bathurst_stig_
Posted 02 July 2011 - 04:29 PM
Thanks...
#2
Posted 02 July 2011 - 05:47 PM
On an LC+J yes they are different
#3 _Bathurst_stig_
Posted 02 July 2011 - 06:03 PM
#4
Posted 02 July 2011 - 06:14 PM
Proportioning valve fitted to that car
So all 4 6 8 and drum or disc front all used the same cylinders (3/4")
L34 was the only one to use the 7/8 wheel cylinders due to them using the HQ 10" drum system
#5 _Bathurst_stig_
Posted 02 July 2011 - 07:11 PM
#6 _Bathurst_stig_
Posted 03 July 2011 - 11:48 AM
#7
Posted 03 July 2011 - 01:28 PM
Whereas the LH-UC runs cylinders that use pushrods coming out of the pistons that sit on the shoe differently
#8 _Bathurst_stig_
Posted 03 July 2011 - 06:42 PM
#9
Posted 03 July 2011 - 07:12 PM
HK are 10" Torana are 9"
#10 _Bathurst_stig_
Posted 04 July 2011 - 07:24 AM
#11
Posted 04 July 2011 - 09:35 AM
#12 _Bathurst_stig_
Posted 04 July 2011 - 01:54 PM
#13
Posted 04 July 2011 - 03:32 PM
#14 _Bathurst_stig_
Posted 04 July 2011 - 05:34 PM
#15
Posted 04 July 2011 - 05:40 PM
#16 _Bathurst_stig_
Posted 04 July 2011 - 06:16 PM
#17
Posted 04 July 2011 - 06:20 PM
#18
Posted 06 November 2016 - 04:05 PM
Found this old thread, but it doesnt answer my question....
Repacing rear wheel cylinders in LC GTR....two different places assure me the Bosch ones in the pics are the correct ones...however they are 4mm shorter....any advice.....Datto?
.Thanks
Attached Files
#19
Posted 06 November 2016 - 04:26 PM
just read that...sorry for the confusion...they both compress to be appx 74mm....but the metal body on the new one is longer?..is that an issue?
#20
Posted 06 November 2016 - 04:58 PM
They are the correct part #
#21
Posted 06 November 2016 - 05:05 PM
Thanks mate....just wanted to be right...now all thats left is to get the replacement chassis -to - axle hose, as its blocked. ( apparently not uncommon).
Thanks again
#22
Posted 08 November 2016 - 07:08 PM
Thanks to Datto for his various bits of advice...it now stops like a champion!...never been better.
#23
Posted 08 November 2016 - 08:33 PM
Yah !!
Something actually worked !!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users