39 replies to this topic

[A9X]

what about the opposite side battery tray, and some front inside mudguards

[LX Torry Freak]

A9X, on 04 February 2012 - 08:20 AM, said:

what about the opposite side battery tray, and some front inside mudguards

Yeah mate, stocks both the tray with holes for the Carbon Canister, and one without.
https://fbcdn-sphoto...7_8104315_n.jpg

Front inside Mudguards also. Can't find picture, I have one though, they are a good fit, but they have two strengthening beads down the bottom piece near the bolt holes which I am removing.

[madmax]

let me know when he makes them i will buy two straight away

[tuxedoss]

What about the bonnet hinge area, do they have them available yet or is that the front inside mudguard your talking about.

[LX Torry Freak]

tuxedoss, on 04 February 2012 - 12:42 PM, said:

What about the bonnet hinge area, do they have them available yet or is that the front inside mudguard your talking about.

It's on its way mate, should be available for purchase soon. His most pressing matter is the boot floor, then he can move onto the other moulds etc however he's still flat chat making panels left right and centre at the same time. He made 200 door skins in 1 and a half months. 130 of which were for Toranas.

Just be patient, it will be available soon enough.

Just to clarify, you mean the actual hinge mount plate or just the panel?

[A9X]

hope he has time to answer a few eails then.

[LX Torry Freak]

Haha, always has time for his customers.

[tuxedoss]

LX Torry Freak, on 04 February 2012 - 06:37 PM, said:

Just to clarify, you mean the actual hinge mount plate or just the panel?

Is the hinge mount plate the bit spot welded on with the captive nuts, if so yes this bit. The inner guard panel is flat so I plan to just patch that with a piece of flat steel and plug weld the plate on. However if his replacement piece is the mount plate already spot welded onto a patch panel that can be welded in this would be good. Do you know exactly what he's got?

[LX Torry Freak]

I was under the impression it would be the bonnet hinge mounting plate with the captive nuts.

[LHSL]

Hi Liam,

Any update in regards to the LH/LX boot floor panels?

Cheers,
Phillip

[LX Torry Freak]

Gday Philip funny you should mention it. Went and saw him today and he said he had some delays with some back orders on Door Skins. But he said he will be getting on it shortly and will hopefully have it ready to go in the next 4 weeks.

Will keep you all posted.

[hainzy]

Looking forward to these boot floors too! My traanas gone off to have the rust dealt with, and the repairers going to fabricate most stuff himself but Ill be getting a boot floor when theyre done, so thatll be last. Any updates?

[A9X]

received the two engine bay chassis rust repair panels.

Very happy camper.

[LX Torry Freak]

A9X, on 15 March 2012 - 04:30 PM, said:

received the two engine bay chassis rust repair panels.

Very happy camper.

Good stuff Welby. Which section is that BTW?

[A9X]

The battery tray and its opposite side