Steering Rack End Boots LJ
#1 _Steven72_
Posted 25 April 2012 - 10:36 AM
#2
Posted 25 April 2012 - 10:41 AM
#3
Posted 25 April 2012 - 10:51 AM
Yeah, my LC ones are.
^^^^ yep, LC/LJ 6cyl rack boots are not an identical pair.
#4
Posted 25 April 2012 - 01:06 PM
#5
Posted 25 April 2012 - 03:41 PM
Thats what my cattledog at work says too
WOW, that's one very clever cattledog you have there Neil. LOL.
#6 _Agent 34_
Posted 26 May 2012 - 11:50 AM
rares wanted $20 per boot.
stay tuned.
#7
Posted 27 May 2012 - 06:22 PM
Regards John.
#8
Posted 28 May 2012 - 09:23 PM
#9
Posted 28 May 2012 - 09:39 PM
But I'd have to check the sizes as I don't have that info at home
#10
Posted 16 February 2022 - 06:38 AM
Cheers
Jaso
#11
Posted 16 February 2022 - 06:59 AM
This item is currently unavailable for purchase online. Check with your local Rare Spares store.
This item is currently unavailable for purchase online. Check with your local Rare Spares store.
#12
Posted 16 February 2022 - 07:13 AM
I butchered the above post.... but the boots are not available online , Rare Spares , have to call store for stocks,
Support End $21.37 and Pinion End $49.95.
#13
Posted 06 August 2022 - 07:07 AM
Has anyone used these from resto country?
Any comments on Fit?
Attached Files
#14
Posted 06 August 2022 - 08:02 AM
#15
Posted 07 August 2022 - 02:50 AM
Agree with James ^^.
They fit OK but you will need to rework the groove in the small end of both where the clamp/cable tie goes as it is nowhere near big enough - even for the supplied cable ties DER ... typical Rare Spares quality- near enough is good enough!
#16
Posted 08 August 2022 - 03:11 PM
#17
Posted 08 August 2022 - 08:58 PM
Resto county confirmed having stock of boots, but they are not supplied by Rare Spares.
Well here's hoping whoever made them has worked out how wide cable ties and original claps are, 'cause it was too hard for RSP!
Edited by jpxu1, 08 August 2022 - 08:59 PM.
#18
Posted 17 August 2022 - 06:58 AM
so the Resto Country steering rack boots arrived.
The rod end of the Pinion side boot looks good.
The rod end of the Support side boot could do with some improvement, that i am going to offer some feedback to Resto Country.
**To Extend the rod end clamping surface and taper the boot body as the Pinion boot is.
I removed my old rack boots to also compare the sizing of the larger diameter housing ends, they look ok.
Just included a couple pics of my old boots before removing.
Attached Files
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users