134 replies to this topic

[Cook]

Sounds like good progress. well done. Cheers Ron

[burty]

Finally picked up front guards today

Attached Files

•  IMG_3772.JPG   115.01K   19 downloads

Edited by burty, 20 February 2019 - 07:48 PM.

[burty]

Started reattaching panels Thursday night

Attached Files

•  IMG_3773.JPG   190.13K   15 downloads

[burty]

Fricken hopeless at getting the photos set right? Seem to rotate anticlockwise 90 degrees when uploading

[burty]

Hasnt come up too bad. Its no show car but very happy with the results so far!

All going together ok

Attached Files

•  IMG_3796.JPG   31.54K   11 downloads
•  IMG_3799.JPG   29.01K   11 downloads

[burty]

Lights & Grill to fit. Bumper mounts will take a bit of work as the UC & LX mounts are different.

Attached Files

•  IMG_3797.JPG   34.14K   12 downloads

[burty]

Once again I must pay homage to Dirtbag and his UC/LX conversion many years ago. His build and thread was most helpful as he step by step explained and showed how one method could be done. My car will be nowhere near the finish of Dirtbags but I'm happy with it all the same.
I found the front guards the biggest challenge, I chose Dirtbags method amongst 3 I have seen mainly because the UC panels I had were in such good condition. The front flares and spoiler needed some reshaping but easily achievable.
Bonnet straight off a donor car with no adjustments.
Nosecone had a couple of minor adjustments easily done in the shed.
Original radiator support panel required adjustments on the ends down low to accommodate the nosecone and guards, once again easily achievable.
All of the above took time but nowhere near the span of years I've taken. Someone with a few months of time they can dedicate can achieve the conversion.

[UCgazman]

Thats looking great!

[burty]

Yep can't complain. First time in about 5 years all the front end panels have been bolted together. How's your project?

[UCgazman]

Mine got put aside for a while due to assorted life complications but coincidentally I've just started tinkering with it again so I might have some more pics to put up soon... You've definitely made more progress than me!

[burty]

Lights and grill added looks even better

Will be a while before the bumper is added but taking shape

Attached Files

•  Capture 2.PNG   637.55K   20 downloads
•  Capture.PNG   661.04K   21 downloads

[burty]

Finally loaded ready for the paint shop. Bit of a birthday touch up for the Torana as its 40 years old this month.

Body work and paint for the rear tail light area & black outs to be painted at the front and a general tidy up all over.

Hasn't seen sunlight for a couple of years & project work long overdue.

Attached Files

•  IMG_3863.JPG   42.31K   11 downloads
•  IMG_3864.JPG   34.53K   11 downloads

[burty]

Dropped by spray paint shop today in the booth ready to go. Some minor rust removed and closed door re-spray to bring the whole car up.

Attached Files

•  t3.jpg   18.91K   5 downloads

[burty]

Replacement LH/LX taillight section looking good & some imperfections sorted on the hatch lid, C pillars, roof and drivers door.

Attached Files

•  t1.jpg   18.46K   7 downloads
•  t2.jpg   16.54K   6 downloads

[burty]

Toranas finally back at home with new paint & black outs complete

Attached Files

•  t5.jpg   72.67K   5 downloads
•  T6.jpg   66.52K   6 downloads
•  t8.jpg   68.91K   5 downloads

[burty]

Taking shape with SS Tail lights and new chrome bumper attached. The opaline blue changes tone depending on the light.

Attached Files

•  t2.jpg   63.43K   5 downloads
•  t1.jpg   77.06K   5 downloads

[Rockoz]

Sedan black.

Probably looks nicer that way though

[burty]

I do prefer the blackouts where they are; not that I had a choice as the blackouts around the windows and top of the doors were already done before the conversion. The painter lined the guard and nosecone blackouts with the original black on the top of the doors. He also matched the original gloss black.

[burty]

Put the front end back together yesterday and hooked all the lights up. Nearing the end of the road a few more things to do then a service, tune up and new tires. I know this build was no where as difficult as some however goes to show converting a UC is possible with out too much grief if you have a good base to start with.

Attached Files

•  Car 1.jpg   66.17K   7 downloads
•  Car 2.jpg   62.78K   7 downloads
•  Car 3.jpg   79.02K   8 downloads

[GMH-01X]

Looking awesome Burty you've done a great job on the conversion, the Opaline blue is a beautiful colour.... well done

[burty]

Thanks... when I first purchased the car I wasn't sure about the colour but it has grown on me particularly now the conversion is done.

[Heath]

Yeah Opaline Blue is a sweet arse colour for me too. Love it.

[burty]

Finally finished a few final jobs on the Torana. New piece of timber, hinged and installed tie down points for spare tire and jack. Also dyna-matted the rear hatch area and finished with new carpet. Adjusted new headlights and fitted new tires; 265/50/15 rear and 225/50/15 on the front. Brakes bled, engine serviced and new radiator hoses just needs diff and gearbox fluids changed then rego hopefully later this week. Car starts and runs ok will need a slight tune up but almost ready to roll!!

Attached Files

•  torana 3.jpg   30.89K   6 downloads
•  torana 4.jpg   33.69K   6 downloads