well to get a 26 head with computer loom manifold etc, well lets just say you will be better of buying gtr32 a half cut, instead of trying to source parts individually. UNless of course you can find a chewed up gtr block and work from there
s eries 2 block can be found as cheap as 100 from wreckers but then you have to build internals up. For a nice round figure i would say just on parts alone without engineering 6-7
For a lot cheaper option you could source a rb25det with everything ready to go(including rb30 block) for around 5. There difference in hp wont be a lot, mainly only noticable when you start winding up the boost.
Edited by doucmyuc, 04 July 2006 - 02:18 PM.