Hi all,
Wondering if someone would be able to tell me the diameter, length and the thread pitch of a standard Aussie 4 Sp Shifter? Getting a trick custom one made up and don't have one to measure at hand.
Cheers,
Rob
Aussie 4sp Gear Knob Thread Measurments
Started by
red6
, Apr 03 2014 07:39 AM
5 replies to this topic
#1
red6
-
- Members
-
- 591 posts
Forum Fixture
- Location:Melbourne
- Car:1971 Lc Torana S 2 Door
- Joined: 11-November 05
Posted 03 April 2014 - 07:39 AM
#2
gad05
-
- Members
-
- 420 posts
Forum Fan
- Name:Graham
- Location:Brisbane
- Car:73 lj 2 door , 74 lj sedan.
- Joined: 11-January 09
Posted 03 April 2014 - 05:30 PM
Hi Rob,
Just had a look at my shifter,looks like 1/2" unf 20 tpi ,thread is 25 mm long.
Hope that helps.
Cheers Graham .
Just had a look at my shifter,looks like 1/2" unf 20 tpi ,thread is 25 mm long.
Hope that helps.
Cheers Graham .
#3
red6
-
- Members
-
- 591 posts
Forum Fixture
- Location:Melbourne
- Car:1971 Lc Torana S 2 Door
- Joined: 11-November 05
Posted 04 April 2014 - 08:50 PM
Cheers Graham.
Can anyone else confirm these measurements, they gear knobs are custom made so want to be 100% certain before handing over my hard earned as they are non refundable.
Edited by red6, 04 April 2014 - 08:51 PM.
#4
N/A-PWR
-
- Members
-
- 9,595 posts
CABIN ENGINE CONTROLS GALORE
- Name:Dave I
- Location:Wooroloo, 65km's East of Perth
- Car:'1969' LC RAT TORANA
- Joined: 08-December 12
Posted 04 April 2014 - 09:02 PM
I'll measure mine tomorrow, I would say they are all the same for the four speed shifter. Dave I
#5
WhaleOilBeefHooked
-
- Members
-
- 1,669 posts
Lord Humungus The Ayatolla of Rock N Rolla.
- Name:Andrew
- Location:Sydney
- Car:LJ GTR
- Joined: 06-July 09
Posted 04 April 2014 - 09:12 PM
Graham is 100% correct, Have 1 in front of me and just re-confirmed......
#6
red6
-
- Members
-
- 591 posts
Forum Fixture
- Location:Melbourne
- Car:1971 Lc Torana S 2 Door
- Joined: 11-November 05
Posted 07 April 2014 - 04:00 AM
Thanks for the assistance all. Will be sure to post up some pics once it is done.
Cheers.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
