Dave, R/spares one is folded from A to B.
Posted 20 April 2014 - 07:42 AM
Dave, R/spares one is folded from A to B.
Posted 20 April 2014 - 09:10 AM
Mark
Just measured my rares spoiler. Fold point B is 20mm back from the front corner.
Posted 20 April 2014 - 09:58 AM
and this Rares Spares one is folded from A to B as Mark has said:-
http://www.gmh-toran...e-2#entry824453
Posted 20 April 2014 - 10:10 AM
Rares may have changed the design slightly since I bought mine over 18 years ago.
Posted 20 April 2014 - 10:16 AM
That's what I was thinking Dave,
The one there is from Brisbane. Dave I
I just looked at the Rares Spares Website,
and it is the same as the Brisbane one being sold,
so they have changed and we will need to let them know hey
Edited by TORYPOWER, 20 April 2014 - 10:19 AM.
Posted 20 April 2014 - 10:25 AM
Posted 20 April 2014 - 10:34 AM
Sounds Good Aldo,
We got to get the Air Dam right first, and then move on to the Fasteners. Dave I
the metal is said to be steel so far, so is the original soft and dents easy, or is stone resistant
Posted 20 April 2014 - 10:40 AM
That's what I was thinking Dave,
The one there is from Brisbane. Dave I
I just looked at the Rares Spares Website,
and it is the same as the Brisbane one being sold,
so they have changed and we will need to let them know hey
Doesn't really matter Dave, they still won't be identical to the original without changing a few other details.
As Kockum said, the genuine spoilers have holes not slots for the four bolts along the face mounting flange and Aldo's measurements are spot on.
Posted 20 April 2014 - 04:29 PM
Just got back from a trout fishing expedition , so will put images of NOS part that is the last one of three I bought from a Holden dealer years before rares started making their painted steel version tomorrow .
Fasteners I still have so will include them while I am at it .
Posted 20 April 2014 - 04:41 PM
That will be Great D.
Posted 21 April 2014 - 01:08 PM
Very nicely presented D.
Now we have the XU1 Specimen.
I like how you covered all dimensions and Weight. Dave I
Posted 21 April 2014 - 03:46 PM
kockum,you have measurements spot on imperial measurement is 3 1/2" high by 60 thou material.but i am sure holden used two bolt suppliers?
Posted 21 April 2014 - 04:03 PM
No probs TORYPOWER .
Posted 21 April 2014 - 04:11 PM
Anthony I don't know the answer but if anyone can confirm I would bet on it being Aldo .
Posted 21 April 2014 - 06:32 PM
Hi KRIS,
Now the wait and see Hey.
That one is nailed, and now the next subject. Dave I
Posted 21 April 2014 - 07:17 PM
Except for the "C", it looks like the same bolt they used for rocker cover bolts before being chrome plated.
Posted 23 April 2014 - 05:02 PM
Hi, good info. will need to replace mine.........1 day.
How close are the xu1.com/brads spoilers?
Posted 23 April 2014 - 05:42 PM
Hi, good info. will need to replace mine.........1 day.
How close are the xu1.com/brads spoilers?
Hi Jono
Just had a gander at the pic of Brad Merrick's XU1 front spoiler on his website. Looks to be a lot closer to a genuine one than the Rares Spoiler.
Cheers
Dave.
Posted 23 April 2014 - 07:14 PM
Posted 23 April 2014 - 07:27 PM
Yep CK,
we don't want the Future of XU1's looking like Datsuns hey
Posted 24 April 2014 - 08:37 PM
I've got a flat pattern for an air dam at work.
I copied it from an original NOS item
I'll check mine next week..
0 members, 0 guests, 0 anonymous users