Replacing clock with tacho LX
#1 _zenburger_
Posted 24 April 2014 - 09:42 AM
Checked the usual auction sites and only full clusters going, usualy very pricy and in unknown working condition...
#2
Posted 24 April 2014 - 11:39 AM
#3
Posted 24 April 2014 - 11:54 AM
#4 _zenburger_
Posted 24 April 2014 - 12:03 PM
#5
Posted 24 April 2014 - 01:46 PM
#6 _Muzzy_
Posted 24 April 2014 - 08:00 PM
You will need to run 1 wire from coil neg to tacho . If you want to use the other gauges you will need to change oil sender unit and temp sender
Edited by Muzzy, 24 April 2014 - 08:01 PM.
#7
Posted 24 April 2014 - 10:52 PM
Sometimes you will find a tacho only come up on evilbay.
Saw one a month or so ago. NOS apparently. Think it went for about 200.
With used sets, there is a toroid. Little round thing with lots of turns of hair sized wire.
Its glued to the board.
The glue has now virtually disintegrated and the little thing falls off breaking its wires as well.
But the good news is you can still buy a new toroid. Bad news is trying to find where it connected.
#8
Posted 24 April 2014 - 11:34 PM
you have to modify the white part of the dash that holds the tacho if you put it in a standard cluster. The tacho dash has a cutout where the tacho pokes through.
#9 _zenburger_
Posted 25 April 2014 - 07:09 AM
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users