Have a problem where the dizzy keeps slightly moving about 6 - 8 degrees .
The clamp is a standard red motor v8 wire type , with blue motor electronic dizzy.
Is there a different clamp for a later model dizzy, or any tricks to doing up the clamp to keep it holding
Distributor keeps moving
Started by
_aussie too_
, Apr 24 2014 10:00 PM
4 replies to this topic
#2
N/A-PWR
-
- Members
-
- 9,595 posts
CABIN ENGINE CONTROLS GALORE
- Name:Dave I
- Location:Wooroloo, 65km's East of Perth
- Car:'1969' LC RAT TORANA
- Joined: 08-December 12
Posted 24 April 2014 - 10:09 PM
Hi Wayne
that is very strange the dizzy is moving, like the standard fastener is the same with these different ones, and mine is loose so I can move it by hand, will look into it. Dave I
#4
warrenm
View Garage
-
- Members
-
- 2,106 posts
Forum Fixture
- Location:Central West NSW
- Car:1972 LJ Torana
- Joined: 08-November 05
View Garage
Posted 25 April 2014 - 07:05 AM
I'd be looking at the dizzy for a bent shaft, dry bushes etc. I've never had an issue with using the std clamp.
#5
arrimar
-
- Members
-
- 3,121 posts
"Have you still got that Torana!"
- Location:brisbane
- Car:Salamanca L34, Absinth LH SLR/5000, Caribean Blue LH 5.0, C250 Merc,
- Joined: 13-January 06
Posted 25 April 2014 - 08:30 AM
Kept happing whilst we were out bush once. Centre punched a few light dots where the clamp needed to bite and it solved it.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
