_Edan_
Posted 20 August 2014 - 03:33 PM
We have been discussing the LH LX UC Bumper Bar Over Riders here recently (GMH Part No.: #9933116, #9933117, #9933118 and #9933119).
What is the consensus, are they worthwhile remaking? In demand? Let us know what you think here...
Edan
RARE SPARES
Edited by Edan, 20 August 2014 - 03:34 PM.
Forum Fixture
Posted 20 August 2014 - 03:57 PM
I'd like a set. Don't know about others.
Oh My, Don't you post alot
Posted 20 August 2014 - 04:37 PM
Would depend on price too.
s
Forum Fixture
Posted 20 August 2014 - 05:05 PM
"Have you still got that Torana!"
Posted 20 August 2014 - 05:12 PM
Forum Fixture
Posted 20 August 2014 - 06:46 PM
Heckler Extraordinaire
Posted 21 August 2014 - 11:40 AM
Any bolt shop will have them Kevin.
I looked into having these reproduced out of poly. They could be done in a range of colors too, but there wasn't enough demand at the time.
Forum Member
Posted 21 August 2014 - 01:30 PM
Seem to be plenty available in the marketplace.
Even new ones still show up reasonably regularly
Forum Fixture
Posted 21 August 2014 - 02:51 PM
I think your misunderstanding what I am after ......I am after and need the small clamp / bracket that holds the over rider to the bar ......never seen these in any bolt shop ???Any bolt shop will have them Kevin.
I looked into having these reproduced out of poly. They could be done in a range of colors too, but there wasn't enough demand at the time.
_LH SLR 3300_
Posted 21 August 2014 - 07:45 PM
I'm fairly certain I have a single over rider with the clamp you mention, the over rider itself has damage to the rubber. I'll know for sure if I still have it by Saturday afternoon so PM if you're still in need of the clamp.
Forum Fixture
Posted 22 August 2014 - 09:52 AM
Seem to be plenty available in the marketplace.
Even new ones still show up reasonably regularly
They do.
Often see them on EBay from around $300 for NOS.
This is the most recent one - only $500!!!
http://www.ebay.com....=item2ed59c4aa4
Would depend on price too.
s
Me to - interested but only at a reasonable price hopefully not aligned with what NOS units are going for.
Cheers, TB
Forum Participant
Posted 22 August 2014 - 10:55 AM
I'd like a new set. Not sure exactly what they are for though 
Max
_Matvex_
Posted 22 August 2014 - 01:49 PM
if you hunt around you can find decent 2nd hand ones for $80 a pair. I'd hope repro's wouldn't be much more then that.
Forum Fixture
Posted 22 August 2014 - 01:50 PM
Would depend on price too.
s
Yep in the same boat.
Oh My, Don't you post alot
Posted 22 August 2014 - 03:16 PM
_Edan_
Posted 22 August 2014 - 03:56 PM
Hanra, SLR and SS - I believe they may have been standard. An optional accessory on the rest.
It sounds like they are not in high demand at the moment. Appreciate the feedback from you all.
Edan.
_sstorana_
Posted 22 August 2014 - 04:04 PM
Overriders were standard on;
LH: Nil as standard equipment,
LX: SL/R (3.3 and 4.2lt) and SS (all variants),
UC: SL Deluxe Torana and SL/E Sunbird
They were however, an option for all models of LH, LX and UC Toranas
Interestingly, they were N/A for the standard UC Sunbird...
The price for a set at the time... $11.00 for the front and $11.00 for the rear.
Edited by sstorana, 22 August 2014 - 04:18 PM.
Pops
Posted 22 August 2014 - 07:57 PM
I think your misunderstanding what I am after ......I am after and need the small clamp / bracket that holds the over rider to the bar ......never seen these in any bolt shop ???
A bit of flat 2mm by 25mm wide x 'bout 32mm long steel, drill it, bend it 
If you need a profile of the bends then let me know and I will take one of mine off and scan or draw it
Barry
0 members, 0 guests, 0 anonymous users
