LCGTR engine mounts
#1
Posted 29 May 2015 - 06:36 PM
#2
Posted 29 May 2015 - 07:19 PM
Evening all,are LCGTR engine and gearbox mounts the same as LJ?looks like some one has tried to make a LJ one fit.Mine has the opel gearbox ,so do the opel gearbox mounts differ to the LJ?
Yes, the Opel M20 4 spd gearbox rear mount is different to the Aussie M20 4 spd and M15 3 spd rear mount.
#3
Posted 29 May 2015 - 08:27 PM
#4
Posted 29 May 2015 - 08:41 PM
No eye dear if you can still get new ones.
#5
Posted 29 May 2015 - 09:09 PM
#6 _threeblindmice_
Posted 29 May 2015 - 09:17 PM
My spare is the same , it would take the stress out of the mount with the bottom fitting flat .
143 - Copy.JPG 195.69K 7 downloads
#7
Posted 29 May 2015 - 09:37 PM
#8 _threeblindmice_
Posted 29 May 2015 - 09:43 PM
I am just going to file the rib down and let it sit flat .
#9 _threeblindmice_
Posted 30 May 2015 - 08:48 AM
Ok so you can use the later LJ mounts without any dramas?
If the height of the original mount is the same as the later ones , I will try and get a picture over the next few days of an old mount .
#10 _threeblindmice_
Posted 30 May 2015 - 04:47 PM
A bit hard to get a good shot Paul but the original engine mount stops before the rib at the front .
091 - Copy.JPG 148K 7 downloads
120 - Copy.JPG 122.7K 6 downloads
#11
Posted 30 May 2015 - 05:23 PM
#12
Posted 30 May 2015 - 06:48 PM
I found a HR mount from a 4 speed.( NOS_) they were opel as well
seemed to fit OK in my GTR
#13
Posted 04 October 2016 - 06:16 PM
Does anyone know if the Rare Spares engine Mount EM1005B be suitable for an LC GTR with the Opel Box?
#14
Posted 04 October 2016 - 08:20 PM
No, the Opel uses a different mount to the Aussie 4 spd, Trimatic and M15 3spd.
Edited by S pack, 04 October 2016 - 08:21 PM.
#15
Posted 10 October 2016 - 12:04 PM
I just used a standard mount and re drilled the holes as they are offset to clear the extension housing strengthening web.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users