Hi peoples......just wndering if any one could enlighten me on the initial set up of caster and camber shims after rebuilding an LX K frame.
Need to know how to measure for caster and camber to achieve roughly the correct shim thicknesses as a starting point so I can put the K frame and motor back in the car and be able to drive it to get a proper wheel alignment without it being dangerous or scrub the guts out of my tyres.
The old original shims are long gone so cant put back what was taken out...(didn't think about this when I stripped it years ago) so need a few dimensions to get it all roughly set up.
Cheers
Al