how do you identify the XU1 wheel spacers? i found a pair of very thin spacers look the same as a brake drum face with the stud pattern and the little cresent shaped hole only about 1-2 mill thick, any ideas?
thanks
Posted 25 November 2015 - 08:06 PM
how do you identify the XU1 wheel spacers? i found a pair of very thin spacers look the same as a brake drum face with the stud pattern and the little cresent shaped hole only about 1-2 mill thick, any ideas?
thanks
Posted 25 November 2015 - 08:32 PM
Sound like they may be the correct item but I thought they were closer to 3mm thick but I'll need to check that.
Reproductions have been around for a while now so who knows.
Can you post up a pic?
Posted 25 November 2015 - 08:32 PM
I think Rares sells them.....see if yours look similar?
Posted 26 November 2015 - 12:34 PM
thanks, they are fractionally wider than 2 mill but that could have even been how i was holding the verniers
Posted 26 November 2015 - 12:47 PM
They look like the genuine article. I'll check the thickness of my spare genuine spacers tonight.
Cheers
Dave
Posted 26 November 2015 - 07:16 PM
thanks, that'll be a cool find in amoungst the junk that was in the back of the van if they are
were they XU1 only or GTR aswell
why were such a small spacer needed out of curiosity
Posted 26 November 2015 - 07:54 PM
Pic of a genuine GMH XU1 wheel spacer. Measures 1/10" thick on the vernier.
Wheel spacers were an XU1 thing. Why were they were made so thin? Easy enough to add more spacers rather than have one thick one I suppose.
Posted 26 November 2015 - 07:59 PM
Posted 28 November 2015 - 09:49 PM
0 members, 0 guests, 0 anonymous users