Guys, need a helping hand. I have bought a pintarra diff and it is a 25 spline. the question is, will this fit into the lx if i change the mounts and how much work is it to replace the insides to a 28 spline lsd? i have been told that its as simple as just replacing the inside axle's and centre is this true?
pintarra diff for lx diff conversion
Started by
_brenden_
, May 29 2016 06:53 PM
6 replies to this topic
#2
dattoman
-
- Administrators
-
- 16,471 posts
Do I feel lucky? Well, do ya, punk?
- Name:Neil
- Location:Perth Western Australia
- Car:LX SS , 76 Cadillac , 3 x dattos
- Joined: 04-February 07
Posted 29 May 2016 - 06:59 PM
Replace the centre... you'll likely want to anyway
Get the axles in 28 spline to suit the pattern you need
If re-using the Nissan brakes you can buy undrilled rotors if need be from member "mantis" here
#3
_brenden_
_brenden_
-
- Guests
Posted 29 May 2016 - 07:18 PM
thx dattoman, so the 28 spline axles will fit in the housing with no troubles? is there any thickness difference?
#4
gtrboyy
-
- Members
-
- 3,137 posts
Lotsa Posts!
- Location:SYDNEY,NSW
- Joined: 07-November 05
Posted 29 May 2016 - 09:04 PM
Centre,brakes & axles change over to skyline
Blokes paying good money now for 4.11 pintara gears
#5
rodomo
-
- Members
-
- 17,999 posts
To advertise here, call 13TORANA
- Name:R - O - B Dammit!
- Location:Way out west of Melbourne Awstraylya
- Joined: 10-December 05
Posted 29 May 2016 - 09:31 PM
Just use the banjo and spend the rest on driving lessons................................... 
#6
_brenden_
_brenden_
-
- Guests
Posted 30 May 2016 - 06:19 PM
thx guys, in saying that what gear ratio should i go? its will be a fairly well worked 308 with a manulised trimatic. any suggestions?
#7
_mantis_
_mantis_
-
- Guests
Posted 31 May 2016 - 06:17 AM
Skyline diff housings are the same as pintara just the guts are different (interchangeable)
25 spline for 4 cyl 28 spline for 6cyl and are the same centre as commodore bw75
I have these in my 2 toranas i run 3.08 lsd ratio but with manual gearbox
Edited by mantis, 31 May 2016 - 06:18 AM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
