Hi Guys,
My wiring in my dash is a mess. There are a lot of wires from gauges, switches, stereo and more which are not connected to anything and going nowhere (i mean A LOT). There also seems to be a few wires from the loom which have been cut and are not connected. Also, likely related, most of the gauges on the cluster arent working, I only have the oil pressure light and speedo working.
I've never really done much with wiring besides installing gauges and audio stuff.
I thought I would have a go at tracing the wires from the loom and removing anything spliced in but when I had a look it was pretty daunting not knowing what I was removing as there were some connected straight onto the wires in the loom.
I was wondering if anyone has any suggestions on how to tackle this and get things back to the way they should be?
I have a wiring diagram but i will be honest, I dont really know what to do with it.
Any direction would be appreciated.
Cheers