Hi All,
Can anyone supply a photo of a LX/UC hatch quarter window latch and/or fasteners. They appear to be large countersunk fasteners with a relatively small diameter thread.
I think the LC/LJ 2 door ones will be similar.
Cheers
Tom
Posted 25 August 2016 - 09:49 AM
Hi All,
Can anyone supply a photo of a LX/UC hatch quarter window latch and/or fasteners. They appear to be large countersunk fasteners with a relatively small diameter thread.
I think the LC/LJ 2 door ones will be similar.
Cheers
Tom
Posted 25 August 2016 - 02:02 PM
Another forum member was recently chasing the same screws which I believe ended in a satisfactory outcome.
http://www.gmh-toran...-window-screws/
Posted 26 August 2016 - 11:52 AM
Posted 28 August 2016 - 07:40 PM
I rang Rare Spares about those Screws and was told they are a Metric Thread or "Fine Metal Thread" Thread.
In all the Hatch's I have measured, the Thread for these Screw are 3/16 Whitworth. I am looking for the same
myself. I think the best bet would be to go to a Bolt Shop and get a Stainless Steel "Tapered Domed Machine Screw".
I have found some on the Internet, but they were in the US - Aviation Supply Company - these wanted about $30 each!
- must have been made out if Titanium !
Posted 04 September 2016 - 02:00 PM
I got excited when I saw this thread but I am looking for the other little bolts , part they screw into and the rubber washers that go through the window. Does anyone know where I can get these by any chance? I dropped one and for the life of me I cannot find it!
Posted 04 September 2016 - 07:00 PM
0 members, 0 guests, 0 anonymous users