Has anyone used the 24 circuit Bluewire Motorsport wiring harness to rewire their car? The main yellow ignition wire comes straight from their fuse panel but the LH / LX wiring diagram doesn't indicate this.
If anyone thinks they can help that would be great. 😉
Bluewire Motorsport Harness
Started by
_Ryno364_
, Sep 26 2016 12:12 PM
3 replies to this topic
#2
VDO
-
- Members
-
- 187 posts
Forum Member
- Name:Chris Curtis
- Location:Brisbane QLD
- Joined: 17-September 14
Posted 28 September 2016 - 05:01 PM
Are you using a universal harness..?
#3
_Ryno364_
_Ryno364_
-
- Guests
Posted 29 September 2016 - 12:03 AM
Hey Chris, its the GM harness whereby most of the colours match the factory Holden harness colours but there are various differences here and there. I think I've got the problem sorted now, I was too hung up on trying to modify the Bluewire harness to suit the Holden wiring diagram rather than using the aftermarket fuse panel.
Have wired up the ignition and light switches all seems ok from what I can tell.
#4
VDO
-
- Members
-
- 187 posts
Forum Member
- Name:Chris Curtis
- Location:Brisbane QLD
- Joined: 17-September 14
Posted 29 September 2016 - 08:07 AM
Sounds good.
Yes, you best need to abandon the original wiring colour code and go with what you have now, but make notes, so you have a diagram of some kind for future work.
Keep your old wiring loom. You might want to put it back one day.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
