I need to replace my existing booster (VH271) and master cylinder(P7210) on my early 76 LX. I have a bw diff with vr disc brakes and HQ brakes up front. System has worked perfect until booster master issues. I have decided to remove the proportioning valve by going the Commodore booster/ Ford master cylinder for the A9X look. After searching the forum and looking at the sticky by rorym in the brake section I want to check on booster / master part numbers and make sure I am on the right track. So Commodore booster will be a VH512 DD unit and the Ford master is a P10050. I know I will need to replace some fittings and lines but that is all good as I want to tidy this as I go. Anything I am missing E.G. new brake warning electrical connection ?
Thanks Jayson