Price help on recoed m20
#1
Posted 04 February 2017 - 09:33 PM
box that has been fully recoed internally
and has 2.54 1.83 1.25 1.00 ratios that i
was told it had.i never took the inspection
plate off to have a look at cluster but was
informed it has xu1 cluster..
Im not sure what to offer but i did mention
500 bills and maybe 750 if it was the real
deal.he said im in the ballpark so i gather
he wants more..
First thing i looked for was the yellow xu
stamp on box.its still in its red oxide finish
so i reckon its just a std m20 with xu1
cluster.it does have those 2 grooves on input
shaft but i measured it against a std m20 and
was same..anyhow whats a reasonable price
to pay for a fully recoed box.
Cheers maz
20170204_193717.jpg 198.55K 2 downloads
20170204_193851.jpg 134.31K 3 downloads 20170204_193757.jpg 198.52K 4 downloads
#2
Posted 05 February 2017 - 12:43 AM
Maz, if that box has XU1 ratios then it has a reproduction XU1 input shaft (oil seal type) and has matching oil seal type cover Pt No.9930912 so highly likely it also has a reproduction XU1 cluster gear.
IMO not worth more than $450 if professionally reconditioned and never used since.
#3
Posted 05 February 2017 - 10:58 AM
Go and buy the kit to recon that box yes i know its only an M 20Maz, if that box has XU1 ratios then it has a reproduction XU1 input shaft (oil seal type) and has matching oil seal type cover Pt No.9930912 so highly likely it also has a reproduction XU1 cluster gear.
IMO not worth more than $450 if professionally reconditioned and never used since.
but include labour in the cost see what the damage is
i would think at least $750
#4
Posted 05 February 2017 - 11:19 AM
Go and buy the kit to recon that box yes i know its only an M 20
but include labour in the cost see what the damage is
i would think at least $750
Yes but you will be very lucky if you can recoup what it cost you when you sell it.
#5
Posted 05 February 2017 - 11:21 AM
TrueYes but you will be very lucky if you can recoup what it cost you when you sell it.
#6
Posted 05 February 2017 - 10:12 PM
Hi Maz, I'd want receipts and proof of what's been done to spend more than $500. It has got the reverse switch which is good, as long as it works?
Cheers
Marty
#7
Posted 06 February 2017 - 02:04 AM
The only proof of it being rebuilt was just
a yellow piece of paper saying where it was
from which was a wrecking yard in melb..
Probably same place Als rat trap came from 😜
I didnt really go much on it once i saw that
Mind you it had 1450 wrote on front of box
he never paid that for it and i never asked
how much he did but i reckon hes probably
paid a g for it..
#8
Posted 08 February 2017 - 02:31 AM
Probably same place Als rat trap came from
It came From Holden Engineering
Any more of this Maz and i am going to report you to a Admin, this is the second incident of you saying this stuff, you did it on the LJ getting hit by the Boat page on the Forum, am i unloading on your Cars. well i could but i dont.
Edited by xu2308, 08 February 2017 - 02:49 AM.
#9
Posted 08 February 2017 - 05:13 AM
#10
Posted 08 February 2017 - 11:33 AM
Havnt you got just a little bit of sence of
humour..
DO WHAT YOU frOckING LIKE...SOOK
#11
Posted 08 February 2017 - 06:36 PM
#12
Posted 08 February 2017 - 06:58 PM
frOckin pmslYour a frOcking big sook Al.it was all it jest
Havnt you got just a little bit of sence of
humour..
DO WHAT YOU frOckING LIKE...SOOK
#13 _Agent 34_
Posted 08 February 2017 - 07:40 PM
the xu1 ratios are too long for a streeter in third. unless you shorten up the final drive, so stick with a M20 ratios and an even shorter ratio and it will be a quick street car.
also if you have an agressive cam then a long ratio diff and gear box is not your friend
Edited by Agent 34, 08 February 2017 - 07:43 PM.
#14 _Agent 34_
Posted 08 February 2017 - 07:42 PM
Hang on. Is that not XU1 in pink pen?
Edited by Agent 34, 08 February 2017 - 07:44 PM.
#15
Posted 08 February 2017 - 08:04 PM
Hang on. Is that not XU1 in pink pen?
What did you edit? Cmon we are all friends here. Blank posts are shit
#16
Posted 08 February 2017 - 08:12 PM
It's up to those members to step up, provide true evidence to the contrary of Al's research. Or STFU
#17
Posted 08 February 2017 - 08:23 PM
You got no sense of of humour either Rob
FFS whats wrong with yas..
I purposely done it as fun.stop being so
sensitive on subjects.
#18
Posted 08 February 2017 - 08:32 PM
Here we go
You got no sense of of humour either Rob
FFS whats wrong with yas..
I purposely done it as fun.stop being so
sensitive on subjects.
Yep
I believe the car is what he says it is. I think it's great he has done all the work to find its heritage especially when a tag was missing. Hats off to him I say.
What I do find amusing is the amount of times prof of something was because of a pink frOcking pen which I find ridiculous as we all know this dosent prove shit
But this is only an opinion. We all have one and we all can't agree on them. Sooooooo I guess what I'm trying to say is if you don't said opinion go eat a dick
Again. Just my opinion
#19
Posted 08 February 2017 - 08:36 PM
Post it in the appropriate thread then, don't try and spread it all over the forum as a joke.Here we go
You got no sense of of humour either Rob
FFS whats wrong with yas..
I purposely done it as fun.stop being so
sensitive on subjects.
#20
Posted 08 February 2017 - 08:51 PM
In the boat thread
Seriously...Lighten up..
#21
Posted 08 February 2017 - 08:53 PM
#22
Posted 08 February 2017 - 09:08 PM
Like i said i commented to his so how the
frOck could i in the other.it was to his
comment.
Why you all so sensitive rob .you got a vagina
too.
#23
Posted 08 February 2017 - 09:15 PM
[attachment=69952:images
Attached Files
#24
Posted 08 February 2017 - 09:31 PM
Me too. No point arguing.I do as i wish not as you say
#25
Posted 08 February 2017 - 10:14 PM
Errrrrm gentlemen, wasn't this thread about a gearbox.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users