globe replacement in 76 LX cluster

Hello Forumers

                       Is there an old link in the archives detailing how to change globes in the cluster from start to finish?

cheers

Nothing hard about this one. Remove the cluster. You will see the globe sockets on the rear. Twist them to remove and pull the globe out. Fit new globe and twist in the socket and re install.

Thanks Jason, getting to the cluster i need help with

some info here if it helps.

 

http://www.gmh-toran...r-dash-removal/

should be as simple as remove these 8 screws to pull the facia out. leaving the cluster connected, u will need to disconnect the speedo cable and the wire to the back of the cigarette lighter to  get it out far enough to access the globes. maybe the wire harness at the back of the cluster also.

also undo the screws in the dash pas first and pop it out, is has some clips that just push in. some gentle pulling will get it off  

Edited by 76lxJAS, 18 February 2017 - 09:57 PM.

Thanks for the great advice