Hi all
I am looking for the best way to remove the 6 cylinder yoke to replace with a V8 as I have tried with the rattle gun, breaker bar & CRC and the nut will not budge any tips or tricks you can share.
Cheers
Pitty
Posted 19 February 2017 - 09:08 AM
Hi all
I am looking for the best way to remove the 6 cylinder yoke to replace with a V8 as I have tried with the rattle gun, breaker bar & CRC and the nut will not budge any tips or tricks you can share.
Cheers
Pitty
Posted 19 February 2017 - 02:47 PM
Mine wasn't that bad. Removed the centre from the housing and held it in a bench vice by the yoke and used a breaker bar.
Posted 19 February 2017 - 04:16 PM
Thanks It might have come to a full centre out.
Posted 19 February 2017 - 09:30 PM
Posted 19 February 2017 - 09:38 PM
Preload can be felt as you tighten up the nut if you're a clever dick?
Posted 20 February 2017 - 10:51 AM
Need a big rattle gun.
Could use a breaker bar long enough to touch the ground and push the car the right direction.
0 members, 0 guests, 0 anonymous users