Hi guys
Ive got an hq pano and i just swapped over the vacuum elbow valve thing that comes out of the booster and connects to the hose that runs off to the manifold. Anyway the barbed part that fits into the grommet snapped off and fell into the booster.....i swore a few times to say the least.
So is this bad? Is it gonna cause any issues or will it just float harmlessly around?
Hq brake booster broken bit floating around
Started by
lcgtr1970
, Mar 07 2017 06:57 PM
2 replies to this topic
#1
lcgtr1970
-
- Members
-
- 1,702 posts
Forum Fixture
- Name:Jordan
- Location:having a beer, looking at the torana
- Joined: 13-March 06
Posted 07 March 2017 - 06:57 PM
#2
dattoman
-
- Administrators
-
- 16,470 posts
Do I feel lucky? Well, do ya, punk?
- Name:Neil
- Location:Perth Western Australia
- Car:LX SS , 76 Cadillac , 3 x dattos
- Joined: 04-February 07
Posted 07 March 2017 - 08:34 PM
Most likely roll around in there for years with no issue
Unless its got jagged edges on it
Then it may perforate your diaphragm
#3
lcgtr1970
-
- Members
-
- 1,702 posts
Forum Fixture
- Name:Jordan
- Location:having a beer, looking at the torana
- Joined: 13-March 06
Posted 07 March 2017 - 08:36 PM
Ahh good to hear. Nah it was a clean break! Thanks datto.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users
