Need some help from the brains trust please. I'm putting in a new ignition barrel into my LX and when installed the key will not turn in it, it feels jammed. If I put the barrel in with the drive on the gear turned 180 degrees forward it turns beautifully from ignition to start and back. But soon as I put the key back in the lock position it jams up again and will not turn. Appreciate some feedback please
Ignition Barrel Problems
Started by
_fleigh10_
, Mar 08 2017 10:21 PM
1 reply to this topic
#1 _fleigh10_
Posted 08 March 2017 - 10:21 PM
#2 _76lxJAS_
Posted 08 March 2017 - 10:40 PM
As a guess the toothed shaft that the barrel plastic gear connects to isn't lined up properly. Or even the plastic gear that the barrel connects to is 180 degrees out?
Can u move the push rod up and down through all sections of the ignition switch with the barrel out?
Can u move the push rod up and down through all sections of the ignition switch with the barrel out?
Edited by 76lxJAS, 08 March 2017 - 10:41 PM.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users