Edited by Indy Orange, 24 April 2017 - 07:22 PM.
Chassis axle stand points
#1
Posted 24 April 2017 - 07:17 PM
#2
Posted 24 April 2017 - 08:49 PM
If I needed movement of the rear axle, then I always used to place the axle stands under the chassis rail in the inverted V created where the front trailing arm mount joins the rail. (Fortunate to have the luxury of a hoist these days). Don't forget the bit of carpet if you have good paint to protect :-)
Cheers,
JPXU1
#3 _Bomber Watson_
Posted 25 April 2017 - 02:36 PM
As above, I generally shove them directly infront of the LCA moutning point, in the nice v, and just behind of the front x memeber rear mounting bolt thingo's when im doing that kinda work.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users