5 replies to this topic

[Pop's-SS]

G'day All

 

Taking my SS up to our local TAFE automotive rooms tonight where our car club members can use the facilities to tinker around with our cars or whatever we want to do there

 

Problem with my SS is that when I wind up my window, it goes up at an angle so basically I have to wind it up about 3cm then grab it at the front and pull it back into the bailely channel and keep on doing this process till it is almost to the top and even then the last 2 cm has the window going back out again

 

 I have been told that the regulator is bent and this is the problem but before I go up there tonight, are there any more hints on what might be up with it ??

 

Thanks ............ Barry

[S pack]

G'day All

 

Taking my SS up to our local TAFE automotive rooms tonight where our car club members can use the facilities to tinker around with our cars or whatever we want to do there

 

Problem with my SS is that when I wind up my window, it goes up at an angle so basically I have to wind it up about 3cm then grab it at the front and pull it back into the bailely channel and keep on doing this process till it is almost to the top and even then the last 2 cm has the window going back out again

 

 I have been told that the regulator is bent and this is the problem but before I go up there tonight, are there any more hints on what might be up with it ??

 

Thanks ............ Barry

More likely the little plastic rollers that run in the guide channels are roo ted.

[Pop's-SS]

Thanks for those replies and by the look of it the rollers are stuffed

 

I have a spare regulator somewhere, just got to find it

 

RegardSS .................. Barry

[LC69GTR]

That will teach you for always using down Pervascope

[rodomo]

Lol