I can't find a suitable Grommet to put in the Hole in the Firewall where the Clutch Cable used to pass through for my Hatch 'Auto Conversion'. What have others used or what does an 'Original Standard Auto Trans Body" use?
Grommet for Clutch Cable Hole in Firewall
#1
Posted 30 May 2017 - 07:35 PM
#2
Posted 30 May 2017 - 07:44 PM
An o ring and a nut and bolt?
Silicon and a 20cent piece?
Surly can't be that hard to seal a hole up?
#3 _76lxJAS_
Posted 30 May 2017 - 07:51 PM
Or get some flat 3mm rubber cut 2x ovals and glue them each side with some loctite 406. Effetivly making your own grommet.
Edited by 76lxJAS, 30 May 2017 - 07:53 PM.
#4
Posted 30 May 2017 - 07:59 PM
Silicon and a 20cent piece?
Lol
#5
Posted 30 May 2017 - 09:12 PM
Cut a piece of metal larger than the hole, stick it over the hole with Sikaflex 229, clean up excess Sika and paint as normal when Sikaflex has set.
Edited by S pack, 30 May 2017 - 09:12 PM.
#6
Posted 01 June 2017 - 06:49 PM
what diameter is the hole in the bulkhead that the cable used to come through ?
#7
Posted 01 June 2017 - 07:27 PM
The Hole is 1".
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users