V6 conversions loom for vt304

Hey guys thanks in advance for reading my issue

Couple years back I brought a loom kit that was purchased from v6 conversions (from a mate) its brand new with instruction books from micks4wd, but had v6conversions stickers all over it

I finally got around to putting the vt v8 engine in my hatch yesterday and having issues working out how the torana loom ties into v6conversions adapter loom

On the conversion loom there is 9 wires that are single and free(not in a plug) there there is a plug that plugs into a separate loom that connects to the body control modual simulator

The body control modulal simulator loom has several wires that a single and alone

Any one that has completed this conversion using v6conversions looms that could assist will be of great help

Look forward to assistance in getting my hatch back on the road

This is where the loom come from based on the instructions

http://www.marks4wd....s/mfk690vs.html

How ever it has v6conversions written all over it
So I presume this company buys from v6 conversions

http://www.marks4wd....s/mfk690vs.html

http://imgur.com/a/j9RUY

Right hand side is where the body control simulator plugs in
Next to that is what I presume some how wires into the torana loom
Next to that is a 2 pin plug I'm not sure what for
Then far left is the fuse bar (presume I need to run a wire to the battery for)

Only have instructions for marks 4wd adapters and none from v6conversions so I'm guessing that's why this is so tricky to work out

My vr/vs loom came from v6conversions. the colours in the instructions didnt match the loom supplied. I had a look around the net and found this help full.
http://www.calaistur....php?t=192333#. I found a computer drawing for a vs v8 on that site and sorted the loom

Edited by ljshawn, 11 June 2017 - 08:55 PM.