Wiper arm pivot replacment?
Started by
_brendan_h_
, Jun 11 2017 03:06 PM
8 replies to this topic
#1 _brendan_h_
Posted 11 June 2017 - 03:06 PM
Can somone point me in the right direction on replacing the wiper arm pivots and how to get to the bolts? Not keen on pulling everything apart if i dont need too.
Thanks
Sent from my SM-G900I using Tapatalk
Thanks
Sent from my SM-G900I using Tapatalk
#2
Posted 11 June 2017 - 05:14 PM
Bolts are accessed from behind the dash. The pivots need to come out the heater inlet hole, so the heater box needs to be removed also.
Lovely job...
Lovely job...
#3 _brendan_h_
Posted 11 June 2017 - 05:38 PM
I knew heater box had to come out. Wasnt sure what eles had to come out. Just the glovebox and cluster or the whole dash out
Sent from my SM-G900I using Tapatalk
Sent from my SM-G900I using Tapatalk
#5 _brendan_h_
Posted 11 June 2017 - 07:35 PM
Ahh so pretty easy job. I was thinking the whole dash had to come off. Not just the clustwr
Sent from my SM-G900I using Tapatalk
Sent from my SM-G900I using Tapatalk
#6 _hutch_
Posted 12 June 2017 - 09:50 PM
Easy ??? Bahahaha,just about caused a divorce when I reinstalled them in my car lol,looks easy enough,biggest trouble I had was holding them in position to get the screws to start,it's all done by feel
#7
Posted 12 June 2017 - 10:21 PM
Good point. I fitted mine before the glass went in, that was easy.
#8 _brendan_h_
Posted 13 June 2017 - 03:57 PM
by easy i ment not having to take too much out will let you know how i go.
#9 _brendan_h_
Posted 02 July 2017 - 06:55 PM
took the heater box out today. yup this is going to be a pain in the ass. especial with the motor in the car
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users