Jump to content


hidden wiring / upgrading engine harness


  • Please log in to reply
2 replies to this topic

#1 _lc202_

_lc202_
  • Guests

Posted 24 July 2017 - 03:58 PM

im in the process of hiding the wiring on my lc. obviously I need to extend some wires to reach. I was considering completely re doing the engine harness. my questions are

1. what size wire should I be using

2. are there any upgrades/add ons I should do while im doing it.I was thinking of adding relays for the headlights to help get a bit more light out of the globes.

3. where would I get headlight plugs that don't already have a short length of wire attached. I would prefer to wire it directly to the fitting rather than join it in.

 

thanks in advance

 



#2 _hutch_

_hutch_
  • Guests

Posted 24 July 2017 - 07:40 PM

Not sure if the headlight plugs are available anymore ,I would try Bursons,as far as wire size goes your headlight wiring green and brown use 4 mm,ign pink 3 mm,water and oil pressure 3 mm green and dark blue,alt wl 3 mm colour ? Alt output 6mm red,starter engaging wire 5 mm purple,

#3 _lc202_

_lc202_
  • Guests

Posted 28 July 2017 - 06:26 AM

Not sure if the headlight plugs are available anymore ,I would try Bursons,as far as wire size goes your headlight wiring green and brown use 4 mm,ign pink 3 mm,water and oil pressure 3 mm green and dark blue,alt wl 3 mm colour ? Alt output 6mm red,starter engaging wire 5 mm purple,


Thank you



Sent from my iPhone using Tapatalk




0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users