how do you replace the upper diff bushes on the diff housing
Lh Banjo
Posted 05 October 2017 - 05:20 PM
how do you replace the upper diff bushes on the diff housing
Lh Banjo
Posted 05 October 2017 - 05:54 PM
Just done this Tony- bastard of a job.
Basically you need to bash them out using anything you can find.
It's hard to get a swing at them but a combination of big hammer, WD40, cold chisel, and perseverance
and you will eventually win.
Posted 05 October 2017 - 06:21 PM
Posted 05 October 2017 - 06:21 PM
ok thanks
what about putting new ones in ?
Posted 05 October 2017 - 06:24 PM
Edited by hutch, 05 October 2017 - 06:27 PM.
Posted 05 October 2017 - 06:28 PM
Posted 05 October 2017 - 06:45 PM
any pictures
Posted 05 October 2017 - 07:38 PM
Posted 06 October 2017 - 04:37 AM
Posted 06 October 2017 - 08:12 AM
+1 for the air chisel.
Hammer the 'small' end in 2 or 3 places, ( the old bush will deform ) put the bit behind it & they drift straight out.
Posted 06 October 2017 - 04:23 PM
Posted 06 October 2017 - 04:47 PM
0 members, 0 guests, 0 anonymous users