Perth zinc plater?
#1
Posted 20 November 2017 - 08:37 PM
Looking for any ideas where to get my boomer catch, master cyl cap, some accel linkages zinc plated.
Any idea what this should cost roughly?
Thanks for any help
Bonnet not boomer
#2
Posted 20 November 2017 - 08:53 PM
cost no idea
had some bits done there
#3
Posted 20 November 2017 - 09:05 PM
Yep Anthony will sort you out
Or Zinc Coaters in Radium St
#4
Posted 20 November 2017 - 09:10 PM
I zinc plated my own stuff,
googled it and made a bath with vinegar and ??? something cant remeber now, and used zinc anodes from a boat as the sacrificial bit
as long as you have a reasonable power supply its a piece of cake
and its good fun and you can say i did that myself
I used one of the 10 dollar plastic storage tubs to mix it in
#5
Posted 20 November 2017 - 09:11 PM
#6
Posted 21 November 2017 - 12:11 AM
#7
Posted 21 November 2017 - 07:17 AM
I zinc plated my own stuff,
googled it and made a bath with vinegar and ??? something cant remeber now, and used zinc anodes from a boat as the sacrificial bit
as long as you have a reasonable power supply its a piece of cake
and its good fun and you can say i did that myself
I used one of the 10 dollar plastic storage tubs to mix it in
epsom salts is what you were thinking.
I set up my own plating bath for less than 80 bucks.
Had my own power supply already.
Does a great job.
Will be setting up a nickel bath soon.
#8
Posted 21 November 2017 - 07:34 AM
Not for $100 worth of bits not worth the effort
I guess it Depends
When i did it I didnt have a spare 100 hundred bucks, it was do it myself or not get it done, i think the anode cost me 20 bucks and the vinegar etc another 10.
Already had the power supply and tub,
Its also the difference between a cheque book resto, and a hands on resto
apart from chrome plating, every single thing on my car, was done by me and my Mate.
we did all the conversion work all the mecanicals, all the rust repairs, etc etc
To me thats what makes the car special to me, if i had of just handed over money and had someone else do the work it wouldnt be the same.
Now before you all jump down my throat, I realise that dosent suit everyone as not every one has the means to do that.
but its what i wanted to do. its how i wanted my car to be. hence the reason i was happy to do my own zinc plating for $100.00 worth of parts. ( bonnet hinges )
End of the day Its up to Baz what he wants to do
epsom salts is what you were thinking.
I set up my own plating bath for less than 80 bucks.
Had my own power supply already.
Does a great job.
Will be setting up a nickel bath soon.
Dont recall epsom salts, seem to remember Sugar??? but it was 10 yrs ago, I forgotton a lot of things in that time LOL
#9
Posted 21 November 2017 - 05:41 PM
thanks will give them a try
had some small bits done recently, but now ive found more things to get coated..... and i think i got stitched up couple weeks ago
#10
Posted 21 November 2017 - 11:28 PM
Used zinc coaters in radium st with some good results - actually have some stuff there now and they are busy so i wouldn't expect a fast turnaround
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users