XU1 battery tray support bracket
#1
Posted 18 December 2017 - 09:01 PM
I've googled all the threads here but lots of pics are missing.
I reckon I've read somewhere along the line that they are different to the standard bracket?
Makes sense to me as the return lip on a standard bracket would be facing the wrong way for the narrower XU1 tray?
#2
Posted 18 December 2017 - 09:23 PM
Pinched from Antons Lc Lj Restoration Parts 23903431_1638428779557307_3201260612877287424_n.jpg 73.16K 9 downloads
#3
Posted 18 December 2017 - 09:45 PM
Not the battery clamp
#4
Posted 18 December 2017 - 10:26 PM
#5
Posted 18 December 2017 - 10:47 PM
#6
Posted 18 December 2017 - 10:52 PM
#7
Posted 18 December 2017 - 11:10 PM
lj were closer to rad i found this pic in link
below
www.gmh-torana.com.au/forums/topic/43327-lc-xu1-battery-tray/
#8
Posted 19 December 2017 - 12:06 AM
Hi Rob.i think thats how lc xu-1s were but
lj were closer to rad i found this pic in link
below
www.gmh-torana.com.au/forums/topic/43327-lc-xu1-battery-tray/
Yes Maz that pic is correct for LC XU1.
Hopefully this link will work. http://www.gmh-toran...1-battery-tray/
Edited by S pack, 19 December 2017 - 12:07 AM.
#9
Posted 19 December 2017 - 10:43 AM
#10
Posted 19 December 2017 - 04:39 PM
So basically just flat? Looks like its all square to the guard and rail? Correct?
Here you go.
The vertical plate is spot welded to the carrier, and yes, that daggy arc welding on the chassis rail is original.
Cheers
Bazza
Attached Files
Edited by Bazza, 19 December 2017 - 04:41 PM.
#11
Posted 19 December 2017 - 05:50 PM
i had to put new tray into chateau and i asked the guy to weld it in left handed to get the GMH look!!
#12
Posted 19 December 2017 - 07:47 PM
#13
Posted 19 December 2017 - 08:09 PM
Confused Bazza
#14
Posted 19 December 2017 - 09:18 PM
Thank you gentlemen.................as far as welds go, I'll be putting up some pics in my thread re my parcel shelf...........................all over the place like a mad women's breakfast
#15
Posted 19 December 2017 - 09:21 PM
I think I have already included the support measurements.
Confused Bazza
Sorry Baz, no can view photos atm, like stevie wonder atm.
#16
Posted 19 December 2017 - 10:42 PM
#17
Posted 19 December 2017 - 10:48 PM
Lol
#18
Posted 25 December 2017 - 11:05 AM
Any differences from LC to LJ? Any differences between the Brisbane and Adelaide factories? I did overhear a conversation at the Toranafest show'n'shine suggesting they were different.
Merry Xmas all.
#19
Posted 26 December 2017 - 09:27 AM
Any differences from LC to LJ? Any differences between the Brisbane and Adelaide factories? I did overhear a conversation at the Toranafest show'n'shine suggesting they were different.
Merry Xmas all.
Lc/lj i couldn't tell you, Adelaide to Brisbane ? Yes !
#20
Posted 26 December 2017 - 10:07 AM
Any differences from LC to LJ? Any differences between the Brisbane and Adelaide factories? I did overhear a conversation at the Toranafest show'n'shine suggesting they were different.
Merry Xmas all.
LC XU1 battery tray was mounted 1" further back than LJ XU1.
#21
Posted 27 December 2017 - 12:24 PM
Thanks Gary and Dave.
Bazza, is your picture of an Adelaide LJ battery tray?
#22
Posted 27 December 2017 - 03:52 PM
Thanks Gary and Dave.
Bazza, is your picture of an Adelaide LJ battery tray?
The welding is different from the 2 plants, i can't see pics atm unfortunately, so i couldn't say, but if it's from Bazza's car then it would be Adelaide built.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users