So I wanted to get some hub centric rings to adapt my Commodore Hopper stoppers Hubs to suit my HQ wheels like these:
https://www.ebay.com...eMAAOSwz5ZZtm3k
I measured my Hubs and they are 69.5mm then measured my wheels which was abit harder as my vernier calipers would not fit so eyeballed it with a tape measure, also the Wheel center bore isnt a nice simple circle shape but my best measurement was 86.5mm
Looked up on ebay for rings about that size but could not find any...
Abit of research confirmed Commodore center bore is 69.5mm could only find one reference of HQ center bore size and it was 71.5mm??
So I dont think my eyeball was 15mm off, although I will double check when I get a chance... Can anyone confirm the HQ size?
Do some aftermarket wheels have larger center bores anyway? and i might have to make some custom rings?