Hi all just wondering what people are using for a windage tray?
I have order a mast windage tray cause I'm running a stroker ls1 383
does anyone have the answer to what sump will fit with the mast windage tray
all going in a lh torana
Posted 22 June 2018 - 01:34 PM
Hi all just wondering what people are using for a windage tray?
I have order a mast windage tray cause I'm running a stroker ls1 383
does anyone have the answer to what sump will fit with the mast windage tray
all going in a lh torana
Posted 23 June 2018 - 03:43 AM
Hey Nick
I am not running the windage tray due to the stroke of my crank as hit was hitting it
Motor is ls2 stroked to 408 with Moroso sump
My Engine builder said it will be fine
Posted 24 June 2018 - 05:57 PM
The mast windage tray with fit with the Moroso 20140 and the Moroso 20142.
I did need to provide clearance for the dipstick. The dipstick is a Milodon Stainless flexible tube. The Mildon dickstick was a stiff wire which I didn't like so I replaced it with stainless braided wire dipstick from a 300ZX. You just cut the top of the 300ZX dipstick, cut the dipstick wire to length and fit into the stainless handle on the Milodon dipstick.
Edited by ls2lxhatch, 24 June 2018 - 06:02 PM.
Posted 26 June 2018 - 09:00 PM
Home made, looks somewhat similar to the above.
regards
Posted 28 June 2018 - 08:09 PM
Moroso 20140 sump and what I think is the standard windage tray, had to cut some part of the mount for the Moroso pick up to fit with the windage tray.
P1020342.JPG 157.79K 0 downloads
P1020338.JPG 174.03K 0 downloads
0 members, 0 guests, 0 anonymous users