Uc axles into Lx banjo
#1 _Hilta_
Posted 02 July 2018 - 11:15 PM
#2 _LXT333_
Posted 03 July 2018 - 12:03 AM
I have a complete diff here with all that ready to drop straight in if you are interested.
I just installed a 9 inch so have no use for the banjo.
I have to pull out an axle to confirm but I’m told 336 fine spline.
#3 _Hilta_
Posted 03 July 2018 - 07:07 AM
#4
Posted 03 July 2018 - 07:51 AM
Yes to all that.
So axles from a UC Salisbury diff are the same as an LX Banjo diff?
I would've bet good money that they were not interchangeable, especially if the UC has rear disc brakes.
Edited by Bigfella237, 03 July 2018 - 07:51 AM.
#5
Posted 03 July 2018 - 06:31 PM
So axles from a UC Salisbury diff are the same as an LX Banjo diff?
I would've bet good money that they were not interchangeable, especially if the UC has rear disc brakes.
I've got UC rear discs with fine spline axles fitted into my LX 2.78 diff.
#6
Posted 03 July 2018 - 06:37 PM
There is a "sticky" in the Brake, Wheel section going back to 2011 on "Fitting UC rear discs to LH/LX".
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users