#26 _Animal_
Posted 17 October 2018 - 11:33 PM
Is there a trick to getting the rear bench seat out ? I found the two front positioning screw tabs . Do i need to remove the backs first to get to the rear hold down bolts .
#27
Posted 18 October 2018 - 02:57 PM
Is there a trick to getting the rear bench seat out ? I found the two front positioning screw tabs . Do i need to remove the backs first to get to the rear hold down bolts .
Took mine out the other month, from memory the 2 front screws come out then if you pull the seat forward while pushing down on the rear of each side (about where your bum sits on each side) there is a clip that the seat bottom goes into. I think if you lift the front and look in with a torch you will see how it goes.
Edited by CI 0308, 18 October 2018 - 02:58 PM.
#28
Posted 19 October 2018 - 07:38 AM
#29
Posted 19 October 2018 - 03:51 PM
Lift up front edge and push backwards and it will pop up then pull it out.
Yeah thats prob it, I couldn't remember if it pulled forward or backwards. There is a hook arrangement that the steel part of the seat hooks onto.
#30 _Animal_
Posted 19 October 2018 - 09:26 PM
#31
Posted 22 October 2018 - 02:40 PM
Appreciate the kind words also.
Mint Julep is a great colour... my first Torana was that colour from the factory and I resprayed it the same, but added a black bonnet. Photographed poorly on older digital cameras, but always awesome in person:
Edited by Heath, 22 October 2018 - 02:41 PM.
#32 _Animal_
Posted 26 October 2018 - 04:56 PM
Bit of progress in the last few days . Rebuilt & refitted front brake calipers due to pistons stuck in the bore . New fuel sender arrived from RestoCountry and went in quite easily . Blew all hard lines clean & fitted all new flexi fuel lines . Cleaned complete interior and refitted after a floor inspection . Just a heap of fiddly bits to square away now before the RWC next week .
#33 _Animal_
Posted 05 November 2018 - 06:26 PM
#34
Posted 06 November 2018 - 05:51 PM
Nice work, how did it go?
#35 _Animal_
Posted 09 November 2018 - 02:34 PM
Passed RWC and registered on Tuesday . Great gift for us on our wedding anniversary . Booked in at Tint Master next week to remove old bubbled tint .
Keen for a drive on the weekend . unsure if photos on this post are visible or not ? Photobucket has a forced update changing the album layout and
process to upload . now that the hatch is on the road I can tackle any little things that need addressing mechanical wise .
#36
Posted 09 November 2018 - 02:59 PM
LOL... you must be the only person in the world still using photobucket!
#37
Posted 11 November 2018 - 10:50 AM
But your photos are fortunately working.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users