Hi all, I have a 350 sbc stroked to 383. What would be a good limit to set the revs to using the MSD digital 6AL?
TIA
Posted 15 December 2018 - 09:19 AM
Hi all, I have a 350 sbc stroked to 383. What would be a good limit to set the revs to using the MSD digital 6AL?
TIA
Posted 15 December 2018 - 12:20 PM
Posted 15 December 2018 - 04:24 PM
Rev limits are dictated by power curves, no use reving to 7000 if it drops off the curve at 6.
Posted 15 December 2018 - 04:39 PM
The reason I ask is I have been led to believe my flexplate has come loose due to over revving so I am going to take out the MSD 6A and put in an MSD 6AL and wasn't sure what to set the limiter to. I have been told 6000rpm.
Posted 15 December 2018 - 05:33 PM
Posted 15 December 2018 - 11:28 PM
0 members, 0 guests, 0 anonymous users