308 Turbo to Trimatic Gearbox
#1 _MickR_
Posted 21 November 2019 - 11:54 AM
I have a turbo block 308 and a trimatic gearbox to go in my LX. The adapter plate kits seem reasonably thick. If using one will everything still line up and bolt together ie: engine mounts, crossmember and tailshaft. Thanks Mick.
#2
Posted 21 November 2019 - 12:09 PM
The adapter plates are 3/4” thick so your box moves backwards by that amount.
#3 _MickR_
Posted 21 November 2019 - 06:37 PM
Thank you, exactly what I needed to know. Cheers.
#4
Posted 21 November 2019 - 07:07 PM
#5
Posted 21 November 2019 - 07:27 PM
Torque Power do new replacement Trimatic Bellhousings to suit Chev pattern.
#6
Posted 21 November 2019 - 07:45 PM
#7
Posted 21 November 2019 - 11:08 PM
Harrop in Melbourne did one for me a few years back. Was cheaper than buying a new bellhousing at the time.
Keep in mind that if you start chasing big power then at some stage you are going to wish you had a turbo pattern motor. Plenty more big power trans options.
#8 _MickR_
Posted 22 November 2019 - 11:39 AM
Thank you all for the information, very helpful.
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users