How good do Webbers look on a red 6 that engine would sound awesome at full song
https://www.youtube....h?v=7-sh-za1hOU
Posted 19 January 2020 - 07:09 PM
How good do Webbers look on a red 6 that engine would sound awesome at full song
https://www.youtube....h?v=7-sh-za1hOU
Posted 19 January 2020 - 08:48 PM
Posted 27 January 2020 - 03:18 PM
Great build!
I’m in the late stages of assembly some gizzards to go into a stroker inline 6 bmw about 199 CI up from 152 CI not too dissimilar in many ways and these are the kind of numbers i'm aiming for
What exhaust was this running in terms of primary and collector size and length etc?
who did the machine work?
Sorry mate I didnt see this post till now- as James mentioned the pipes are HM9Cs, I cut the flanges off and welded the old pipes to the JZED flange. They were rusty old pipes that I picked up for $100- they work very well though. Was not fun grinding and welding them up though, needed a bit of 'persuasion' hahaha.
The machine work was done by Westend Performance.
Posted 31 January 2020 - 03:28 PM
Posted 31 January 2020 - 03:57 PM
I have put a dyno video on Youtube if anyone is interested.
Cheers.
v e r y interested...but vid shows as "private" , can't see it. You may just need to change the settings mate.
Edited by RallyRed, 31 January 2020 - 03:57 PM.
Posted 31 January 2020 - 04:40 PM
Sounds awesome, made me smile when l think back to the 202 in my HQ race car in the 90's
that made about 200 less HP than that thing. It also didn't sound much like that either
Posted 31 January 2020 - 04:50 PM
v e r y interested...but vid shows as "private" , can't see it. You may just need to change the settings mate.
Cheers mate should be right now (I think)...
Posted 31 January 2020 - 05:32 PM
Posted 31 January 2020 - 06:02 PM
beautiful...very good
Posted 31 January 2020 - 10:41 PM
Doesn't sound like it's revving that hard, but it says 6950rpm on the screen.
Posted 06 February 2020 - 01:48 PM
So when are we going to see this beast of yours at a STC event?
Posted 07 February 2020 - 08:15 AM
So when are we going to see this beast of yours at a STC event?
I will get it out soon, just ironing out some bugs... Charging system is working but im not getting full volts to battery so need to work that out... I am getting a lot of voltage drop to the battery. Heat soak is affecting the starter motor as well so need to insulate that a little better. Just little things but time is not in my favour lately...
0 members, 0 guests, 0 anonymous users