G'Day,
Anybody have the measurement for where to drill holes for lefthand side mirror on an LJ?
Is it the same on both sides?
Can't find anything in parts manual or online..
Cheers,
Liz
Posted 14 July 2020 - 01:51 PM
G'Day,
Anybody have the measurement for where to drill holes for lefthand side mirror on an LJ?
Is it the same on both sides?
Can't find anything in parts manual or online..
Cheers,
Liz
Posted 14 July 2020 - 02:24 PM
Posted 14 July 2020 - 04:22 PM
Surely be the same both sides?
Screenshot_20200714-122258_Photos.jpg
Posted 14 July 2020 - 08:03 PM
Edited by RallyRed, 14 July 2020 - 08:04 PM.
Posted 14 July 2020 - 08:23 PM
I don't have a measurement, but here's a pic of an old GTR I used to own. Looks like a good match for the drivers side position
Posted 14 July 2020 - 09:30 PM
Projecting a line down the edges of the door division channels we can see the top rear corners of the mirror pads are positioned basically the same on both doors.
LJ LH mirror position.jpg 162.27K 10 downloads LJ RH mirror position.jpg 100.65K 9 downloads
Posted 15 July 2020 - 12:03 PM
Hi Liz,
If you are putting the LHS mirror on Pinky for track work...you could consider an alternative like this ( not sure this is exactly the one I have).
Clips on/off over the existing rear view mirror. I have one in the green Nc car, fantastic bit of gear. You can pretty well see out of the rear window AND both side windows, from the rear vision mirror.
Prob. a bit ugly for road us, but great on track.
This is a great idea, Col. I will indeed get one. I already have a slightly bigger than standard unit in the pink car from when it was raced previously but the more vision the better for a learner like me
LH mirror already purchased as well so it will be installed as I really find the odd mirror on only one side a bit annoying
Thanks for the tip.
Cheers,
Liz
I don't have a measurement, but here's a pic of an old GTR I used to own. Looks like a good match for the drivers side position
Thanks Kev, that's a great help
Projecting a line down the edges of the door division channels we can see the top rear corners of the mirror pads are positioned basically the same on both doors.
Thanks a bunch Dave, this helps a lot. Much appreciated
Cheers,
Liz
Posted 15 July 2020 - 07:16 PM
G'Day,
Anybody have the measurement for where to drill holes for lefthand side mirror on an LJ?
Is it the same on both sides?
Can't find anything in parts manual or online..
Cheers,
Liz
Posted 15 July 2020 - 07:46 PM
I expect GMH would have supplied fitting instructions with the NASCO left hand door exterior rear view mirror accessory package.
Posted 16 July 2020 - 06:43 PM
not trying to hijack this post
but is the lc the same right to left
Posted 16 July 2020 - 07:08 PM
Posted 16 July 2020 - 09:59 PM
O'l mate put one on the left, same as original right, could hardly see the mirror? LC
Posted 17 July 2020 - 09:40 AM
O'l mate put one on the left, same as original right, could hardly see the mirror? LC
Yep, not much mirror to look at on those LC ones.
I had the same little round driver's side mirror on a HG and it was mostly a waste of time trying to see anything. Big lump of a car with a little tiny mirror looked ridiculous
Cheers,
Liz
Posted 17 July 2020 - 10:06 AM
not sure about eh but on hr
Posted 17 July 2020 - 10:47 AM
Posted 17 July 2020 - 05:39 PM
not trying to hijack this post
but is the lc the same right to left
Posted 17 July 2020 - 05:59 PM
Posted 17 July 2020 - 10:29 PM
Edited by RallyRed, 17 July 2020 - 10:30 PM.
Posted 18 July 2020 - 07:11 AM
Are not LC's single mounting hole,at leading edge of door?
LC has two holes. One for bolt the other for the alignment pin.
Posted 18 July 2020 - 10:24 AM
yes i know that there are right and left stems
i am asking about mounting positions
thanks for the replies
cheers bat
Posted 14 August 2020 - 12:35 PM
Chinese crap mirror cost $225 from Muscle Car Parts...
Broken glass from MCP Mirror copy.jpg 187.4K 8 downloads
The glass fell out the first time the door was closed...
MCP Mirror without glass.jpg 88.64K 8 downloads
and I was left with a mirror head without glass.
Lucky I had an old HQ mirror head.
Buy Australian if you can. F@K the Chinese!
Cheers,
Liz
Posted 14 August 2020 - 06:01 PM
Posted 14 August 2020 - 11:20 PM
Hi Liz,
this happened to mine and MCP were happy to give me another one once they had confirmation of receipt and received the broken one. The second mirror head had a stronger mirror fixing.
Mine fell out while my wife was adjusting it doing 110kph on the HWY.
Marty
Edited by sibhs, 14 August 2020 - 11:21 PM.
Posted 15 August 2020 - 08:48 AM
Hi Liz,
this happened to mine and MCP were happy to give me another one once they had confirmation of receipt and received the broken one. The second mirror head had a stronger mirror fixing.
Mine fell out while my wife was adjusting it doing 110kph on the HWY.
Marty
Posted 15 August 2020 - 09:53 AM
They don't want the glass back!
If I had to guess - It looks like they've had a few of these and they're getting mirror glass cut and fitted in Australia to all the returns. (the mirror edging looked slightly different)
Marty
0 members, 0 guests, 0 anonymous users