Jump to content


Photo

Please help identify this wire LX hatch


  • Please log in to reply
4 replies to this topic

#1 jonesy

jonesy

    Forum Fixture

  • Members
  • PipPipPipPipPip
  • 637 posts
  • Location:perth south of river
  • Car:hatch
  • Joined: 16-August 10

Posted 08 May 2021 - 02:07 PM

Hey lads
Looking to identify this wire looks like it runs in the same harness on my LX hatch as the windscreen wiper motor wiring
The second picture shows where in the harness it runs along.

Thanks heaps guys this forum has been a great help

Attached Files



#2 axistr

axistr

    Forum Fixture

  • Members
  • PipPipPipPipPip
  • 1,163 posts
  • Location:North west sydney
  • Joined: 19-November 05
Garage View Garage

Posted 08 May 2021 - 06:55 PM

Possible connects to the coil. I will have a look at my torana wiring diagram tomorrow to confirm colour of wire. Have you checked if there is any voltage to the wire with ignition on.?



#3 Bigfella237

Bigfella237

    Socially Distant

  • Members
  • PipPipPipPipPipPipPip
  • 4,360 posts
  • Name:Andrew
  • Location:Far South Coast of NSW
  • Car:(s) not as many as I'd like but more than I've got space for!
  • Joined: 31-October 14

Posted 08 May 2021 - 07:31 PM

BTW, you're not supposed to cable tie plug leads together like that, you can get voltage induced from one to another causing a misfire. Granted it's more likely to occur in older leads but still it's considered bad practice.

 

Just about any auto parts store should have plastic separators available for cheap.



#4 Kirk

Kirk

    Forum Fixture

  • Members
  • PipPipPipPipPip
  • 840 posts
  • Name:Kirk
  • Location:Sydney
  • Car:LX SS 253
  • Joined: 30-July 13

Posted 08 May 2021 - 08:16 PM

it comes from the kick down switch 

is your car an auto?


Edited by Kirk, 08 May 2021 - 08:18 PM.


#5 axistr

axistr

    Forum Fixture

  • Members
  • PipPipPipPipPip
  • 1,163 posts
  • Location:North west sydney
  • Joined: 19-November 05
Garage View Garage

Posted 13 May 2021 - 05:28 PM

Jonesy, I could only find my LH wiring diagram so not sure about the differences. The only Tan wiring I can see is the fuel gauge sender wire circuit, high beam circuit from dipper switch to lights and brake fail and park brake light warning light circuit.






0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users