3 replies to this topic

[howie1300]

Hi bought these flaps off ebay, be aware only comes with 1 plate and its on the opposite side to where you screw on, so you need large washers on the side with no plate and the side with the plate is made out of mild steel and in plain view when fitted. So I will have to remove plate,  paint it find new rivets,  and put on other side and leave the side in view with no plate. Or do I get some plates made from stainless steel.

 

Howie

 

 

 

 

Attached Files

•  IMG_1791.jpeg   120.11K   4 downloads
•  IMG_1792.jpeg   94.3K   4 downloads

[howie1300]

Upon closer inspection of my old mud flaps, the bracket is only on one side, the opposite side to this.

 

 

Howie

[Shiney005]

Yeah, that doesn't look right at all Howard.

Just a small tip, you have asked your question in the "Introduction" section of the forum, and not many people take the time to read the posts in there. If you asked it in the "General LH-LX-UC" section, a lot more guys would see it.

Cheers.

[claysummers]

Another half arsed repro from ..............
If the old bracket is still good you could tidy up and reuse. Otherwise could make some up pretty easy.


Sent from my iPad using Tapatalk