2 replies to this topic

[Punchy]

Hi team,

I busy fitting glass bars and lower air dam to the front.

My cars black, and wanting to know is there any prescribed fasteners for the fastening of the air dam, or is it just some stainless screws we wack in . I was thinking stainless heads with a washer head built in..?

Attached Files

•  1628558392031657130494.jpg   118.32K   5 downloads

Edited by Punchy, 10 August 2021 - 11:41 AM.

[Shiney005]

The first pic shows what you are describing with a black flat headed self tapper with a small washer under it. The second pic is what I believe is the original, which is the same, but the "washer" is part of the screw.

 

 1977-holden-lx-torana-slr5000-a9x-sedan (9).jpg   153.49K   6 downloads

 

 IMG_E7247-scaled.jpg   136.88K   5 downloads

 

If you are using the original number plate holder, it will help to keep the centre section rigid. The A9X's also came with small braces that attached from the back.

 

 3-1.jpg   185.24K   4 downloads

Edited by Shiney005, 11 August 2021 - 08:57 AM.

[Punchy]

Fantastic. Many thanks.